LumberJocks

Woodworking blog entries tagged with 'knife'

  • Advertise with us
View PaBull's profile

Carving a carving knife #1: First attempt to make a carving knife

10-22-2010 04:38 PM by PaBull | 11 comments »

My second oldest daughter needs a birthday gift and I have only days to complete it. Don’t you love those last minute projects? She is into carving, but only has the carving set with the “end blades”. So why not build a carving knife. So last knight I started with a block of pallet wood, a rod of 3/16 brass and a sawzall blade.The shape I was going for is shown here: I took a sawzall blade and cut it in half with a sheet metal cutter. (this stuff is hard to cut) After ...

Read this entry »


View PurpLev's profile

Work(shop) in Progress #8: New Table Saw: Low Profile Riving Knife for Ridgid R4511

04-13-2009 03:51 AM by PurpLev | 53 comments »

So among the few shotcuts that were made by providing the R4511 at the market price was the fact that it only came with a splitter+integrated blade guard but no additional low profile riving knives (for non through cuts). for the price this saw comes at – one can’t complain, and the fact is- it does have a riving knife mount system which is a good base to start with. solution: homemade riving knife made out of 1/8” plate of 6063 aluminum: EDIT: If I’d do this again,...

Read this entry »


View PurpLev's profile

Work(shop) in Progress #6: New Table Saw : Unpacking and Assembly of Ridgid R4511

03-22-2009 05:01 AM by PurpLev | 50 comments »

So after much research and debates, I have finally charged the card, and 2 days later the delivery arrived with the new saw in the box (I opted to have it delivered from the store as opposed to pick it up myself – at 450lbs, I simply wouldn’t be able to unload it myself) Delivery from HD was swift and smooth, positive and friendly guy stop at my place saturday morning, and helped me position the box in my garage – I couldn’t be happier (took 5 minutes, 4.5 of those was...

Read this entry »


View MyChipCarving's profile

Holly pattern, Chip Carving, add color? #1: Chip carved plate, add color?

02-16-2011 06:21 PM by MyChipCarving | 21 comments »

I’m wondering what you think about my adding some color to this chip carved plate. From the start I’d planned on adding a light, transparent, oil-based green color to the leaves and red to the berries.But now that I’ve gotten this far in the finishing process, I really like the way it looks and I’m chickening out when it comes to doing anything else to this chip carving.What do you think?

Read this entry »


View bobasaurus's profile

Making a Folding/Pocket Knife #1: Layout, stock removal, and mechanisms

03-17-2013 07:26 AM by bobasaurus | 2 comments »

(This is mostly metalworking, though it does use wooden jigs and scales eventually) After building a cheap folding knife kit from Woodcraft (which was just making some scales, bolting things together, and sanding/finishing), I became interested in making one myself from scratch. I talked to a coworker who makes knifes and did some internet research before placing an order for lots of knife stuff from Jantz supply: This includes a flat bar of O1 tool steel for the blade and mechanis...

Read this entry »


View mafe's profile

Knife for my daughter

07-05-2017 04:19 PM by mafe | 13 comments »

Knife for my daughtershe’s a grown up now… My sweet little daughter is still sweet, but not small any more.She is turning 18 on the 17 this month but we already celebrated her big day a month early, so friends and family would not yet be on holiday. Half a year ago, she told me that when she was turning 18, she would be happy to get one of my hand made knifes. She felt it was time for a new and more adult, than the kids knife I gave her ten years ago or so and I agreed to th...

Read this entry »


View WayneC's profile

Playing Around with Carving #9: Just Kicking Around today

08-14-2011 06:02 AM by WayneC | 18 comments »

I roughed out another spoon today. I was trying a different handle shape to get a feel for it. Playing with some curves. Also, I’m looking for good ways get a better finish on the spoon bowl. I tried sanding some. I need to get better at making smooth cuts to reduce the work required to finish the spoons. I am thinking of getting some curved knives. That or I need a wider/flatter bent neck gouge. I am thinking of a knife simlar to one of the curved ones from Pinewood For...

Read this entry »


View Brit's profile

A Wonderful Gift from a Great Friend

10-17-2011 03:31 PM by Brit | 19 comments »

Last week when I was in Denmark, I popped in to see Mads and after a terrific meal, we spent a few hours talking tools. Time passes quickly when you’re in good company and all too soon it seems, I was on the last train back to my hotel. During the evening Mads presented me with a present – a MAFE original marking knife, which as you can see, came with a smile. Mads made the knife to use Exacto blades, so eventually after many sharpenings, I will be able to replace the blade...

Read this entry »


View ic3ss's profile

Jointer cutter head lock mod #1: Modify cutter head so it can be locked when adjusting knives

05-21-2012 04:53 AM by ic3ss | 2 comments »

Well I’ve had this old jointer for a little over a year now and have had to pull the knives for sharpening a couple of times already because of damaged edges. I have to be more careful I guess. I’ve read all about how to adjust the knives, it’s really pretty simple concept but it’s not that easy sometimes to get the damn things even from one end to the other, and all three knives the same. The main problems I’ve identified are these: Moving a dial indicator ar...

Read this entry »


View jeffswildwood's profile

rebuilding an old knife #3: Starting the scales

07-04-2017 06:27 PM by jeffswildwood | 11 comments »

Hello to everyone who is following this thread. Not had much of a chance to work on the old knife in a bit but finally had a chance today. I have a plan how I want the handle to look, a bit ambitious but maybe doable. I got some wood in from Hokieken (thank you buddy) and the ideas went crazy. Here is a basic sketch of what I really want to try. Instead of just a basic handle I want a “layering” in the middle. At first thought I said to myself “are you crazy”? The m...

Read this entry »


1 2 3 4 5 next »
46 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com