How to use a KerfmakerOk, many asked me this question, and I have seen it again and again on LJ. If you need to find out how to make one, you can see my Kerfmaker 'Brass'n wood'. Another fun gadget is the tenonmarker:http://lumberjocks.com/projects/39236 I’ll try to explain, as well as I can, feel free to ask questions if I do not make myself clear (I’m only human): Collect what is needed, in this case a base stock and two thinner side stocks, and of course a Kerfmaker...
Well, yes, the Kerf Maker is a very clever jig. I have a different take on its manufacture. I see a reason to have several, NO, Wait… Why not make them DISPOSABLE? :) I had a need to use one today so why not make one. Here it is: I used a stick of about 1/2” square pine. Yeah, Pine(or is that Poplar?). And some double sided tape. Cut the stick in half. (I’m kinda protective of my tape. Can ya tell?) Then stick both halves together with the tape. &n...
I ran into a problem while making my new box joint jig BJ2. My kerfmaker KM1 does not open wide enough for the kerf that I need to cut. What to do? OK (sigh) This project will have to put on hold while I make a bigger kerfmaker :-( Then a flash of inspiration hit me After fiddeling with the kerfmaker and getting it right sometimes I finaly understand the principal behind it.All that I need is a spacer that makes an allowance for the blade thickness on the one cut. Off to the scrap b...
There has been much discussion on the Bridge City Kerfmaker, but I didn’t find where it was used on a table saw without using a sled with a stop. I am sure I just missed it, but here is my version of the set-up. The Kerfmaker references off a stop on a fence, which works very well for a fence on a radial arm saw or table saw sled. But using the table saw fence to cut slots for my box bottoms and lids, I discovered there was not reference point for the Kerfmaker. I made a simple block...
Building my first kerfmaker has opened up an awesome door in my shop. I have used it for quite a few projects and think it is one of the most simple, useful, and easy jigs to make. I have taken the same approach with stop blocks lately. With a kerfmaker stop block you can make a perfect halflap or dado joint in the middle of your work piece without ever measuring. Here’s a link to the article on my site with two videos showing it. Precision is so easy! http://jayscustomcreations...
If for whatever reason your new Kerfmaker produces either too tight of a joint or too lose of a joint the adjustment is super easy! EDIT: in the few hours since this video has been on youtube I have gotten more negative response and messages than positive. I understand that if cut correctly your joint should be nice and snug. The simple truth is somewhere along the process of my larger kerfmaker I input the same error not once but twice. I have no problem sharing my mistakes. Apparently th...
Just showing how easy these are to make.
She actually came quite some time ago. It was love at first sight for me and I wanted it to be more than just a fling. I was after a permanent relationship but how could I be sure? What about the culture shock? It must be very hard to give up a comfortable life in the culture rich Old World and contemplate an uncertain future in a little Third world country at the very bottom of darkest Africa; strange people speaking strange languages living strange lives, wide open spaces with dangerous ...
- My Journey As A Creative Designer - Woodworking and Beyond - 1793 parts
- Extremely Average - 324 parts
- Toy costruction - 116 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Woodworking on a Half-Shoestring - 82 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1818 entries
- dbhost - 436 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 313 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 241 entries
- Dave Rutan - 231 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- A Slice of Wood Workshop - 210 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 195 entries