Many woodworkers lack confidence in their glue joints. The way to overcome this is by getting to know your products and materials. This is accomplished by experimenting and testing – particularly through destructive testing. I continually test my off-cuts from every project. This provides a form of quality control testing that is specific to each project. In this video I show a couple of the methods that I use to test my glue joints. Testing your joints to the point of wood fa...
This project is not technically finished so I will not post as a project..This part of the blog will deal with the cutting of arcs.I basically used one of the patron jigs I developed to cut the end curves for a Baguette Board…this pivots on the circle cutting jig. Cut two lengths of contrasting or complimentary timbers… I of course chose Purple Heart and Silver Ash…Silver Ash and Tasmanian Blackwood would have also been suitable… But if all you have is Walnut and Curl...
Ive had an experience here at lumber jocks that has caused me to think on this topic today. early this morning i awoke ..it was around 4am…so i went to read my email and catch up with that. I had a private message sent to me, it was entitled apology. This of coarse caught my attention, so i opened it to read and by the time i was done i felt several emotions…one of them was ashamed, the reason being is as i have gone through my life, being a good friend or as we call them here a g...
Hello friends. After more failure with the wooden screws I decided to order some dust collection attachments for the router and order some more maple dowels. While I waited for those to come in I worked on the top and legs. Here is a quick pictorial tour of my progress. Flattened the top. This is the first real workout for the #7! Worked great. Square edges, stool as board jack. First real workout for the #5 to. I love it, it really gets the work done fast! I decided a 2.5” to...
Threaded insert jig – HOW TO MAKEHow to get the dam thing straight in!Ok, not a big problem, but a problem! Here are the challange. Idea! A jig so I can control the angel is 90 degree.Solution a pice of scrap wood, some thread in a ‘nice’ size, and ofcourse the same thread as the inserts inside.Draw up a hole that fits, the hight of the threathet insert and some extra for a nut. Some cutting at the tablesaw. Some more cutting, this could be done with a chiselR...
Between my being a carpenter in today’s Michigan economy (lots of idle time) and my desire to learn more about finishing, I stopped by a local furniture refinishing/restoration shop a couple of weeks ago to see if I could pick up a non-paying apprenticeship just to pick up some knowledge and get some hands on experience. Of course I didn’t just walk in and say “are you guys looking for an apprentice?”. I asked if they were hiring and an employee told me “no”...
I showed Barb this kit the other day, & immediately she said, ”I want one.” When the Sweetie wants something, I usually comply to her wishes. Besides, I can try making something I’ve never done before. This is the kit I ordered, it's called a Reverie Harp.. One thing about this Harp is, anyone can play it because of the way it’s tuned. It has a real soothing sound.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This is a picture of the parts ...
Hello again folks. Here I am in the home stretch. I say that but I know there are still a bunch of details left. I decided to go with drawbored Mortise and Tenons with no glue. The splayed legs on this bench make it incredibly stable as is so it’s not necessary at all. I also won’t have to worry about glue not curing well in the cold weather. The idea of not watching the clock during glue up is pretty nice to, especially on an assembly his size. The hole stress free thing is true in the...
I never want to hear anyone complain about their shop… anything has to be better than a tiny living room in a 400sqft apartment. This is my first project with hand tools. I worked as a cabinetmaker for 6 years, and then moved to NYC 3 years ago and changed careers. I’ve been wanting to get back into building furniture, and after a few months of reading everything Chris Schwartz has written and pretty much every other hand tool blog on the internet, I feel like I know everything...
Updated 1/15/12 We now have our box assembled and glued up. Depending on the temperature, let it dry for a couple of hours, or overnight to be safe.Take the tape off and clean up any dried glue. This is a good time to smooth up the bottom to get rid of any rocking.You can double stick sandpaper onto a very flat and firm surface and slide the bottom across that. The problem with this approach is that sheet sandpaper is way too small. You can stick down several sheets and if you go very s...
- My Journey As A Scroll Saw Pattern Designer - 1584 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1609 entries
- frank - 417 entries
- degoose - 396 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 278 entries
- William - 258 entries
- Betsy - 221 entries
- shipwright - 213 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 186 entries
- Chris Davis - 183 entries
- Smitty_Cabinetshop - 176 entries