Walnut Headboard Build A quick project that is needed but is also a nice mental diversion from the daily grind. Material pulled from inventory is (very) rough cut ‘wormy walnut’ sapwood that isn’t good for much, but is something around 5/4 thick and is long enough (and wide enough) to do the job before me. Using this for the rails, top and bottom. I’ll joint one edge, work up the face, then rip the piece before deciding on what to do with any design element. ...
Hi everybody…....My husband finally got the floor finished…...he did a fantastic job I might add and now…..I finally sucked up enough courage to get started on my kitchen cabinets. The kitchen and dining area is 14 ft wide x 24.6 ft long. My cabinets are made of plywood and my face frames and doors are made out of hickory. I have never worked on a set of kitchen cabinets before, so I am pretty much learning this on my own. I have a friend on here that gives me advice whe...
Maybe “LOVE” is a strong word. But I’m really excited about the final version of the show, and I think most people will feel the same way. Forget about everything we experimented with before. This is all new. It’s been over a year in development, and And I’d like to think it is a pretty unique format! Here’s how it works… The show is designed to have the feel of a single camera “reality” type show. It is meant to be a glimpse into our workshop as if you were just stopping in...
Hello again folks, the next step was to plow some groves in the stretchers and posts of the head board. The old Stanley #45 was the weapon of choice for this stage of the project which is a lot of fun to use. Here I am with the tool in action! In my head I look much cooler doing this. The first challenge I had to overcome was the lack of a plywood sized cutter. As you are all aware ¾” plywood is slightly undersized so I had to use the next size down and then pair away the rest of the w...
Hello Friends, I’m long overdue for an update so there are a lot of pictures. I’ve made quite a bit of progress but the ending is not so happy I’m afraid, after reassembling the parts last night I discovered an error I will have to fix. The great thing about woodworking is that almost anything is fixable, it’s just frustrating. You’ll see what I mean at the end. As usual, I’ll let the pictures do most of the explaining: Cut the shoulders on the angled te...
The other day I found that no matter how safe you try to be accidents do happen. Case in point, jointing a piece of oak using two push blocks to run the board through, the board exploded the blocks flew away and my left hand went into the blades. I amputated the top of my ring and middle finger and part of my index finger. It could have been worse. I am on blood thinners so this posed a whole bunch of complications.So I am stressing my fellow jocks, if you are not comfortable with a ce...
Hello to all and all are Welcome, Intro: Hi, my name is Kory Kiker and a couple of weeks ago Ms. Debbie contacted me about conducting an online class for those interested in learning the art of intarsia. I was very excited about the chance to share a few things I have learned in the last three years of doing intarsia art. Before intarsia I did a lot of wood carving so I hope this helps give each project more depth and definition. I will tell you now that most of the things I’ve lear...
Here is my latest progress. This blog is too damn long, I need to remember to do these more often and break them up. Sorry about that. Mostly pictures though. Questions and Comments are welcome! THE WELL BACK:Trying to “Steam Bend” the tool well back straight. Notice the dowle I used to get the clamp as far out of the way as possible. Hit it with the heat gun Got it straight enough to joint one side and run through the planner without losing too much thickness This...
In this episode we unveil our shop-made bench top biscuit joining machine designed for fast, accurate glue-ups… and we begin the “Ultimate Tool Cabinet Build”. Plus, Stumpy gives you a list of things to do with your Sundays now that football season is over… Here’s some screen shots of the sketchup drawing for the machine. The most difficult part about the build was the mount for the joiner. It took a lot of work to get the design just right. If it’s no...
- My Journey As A Scroll Saw Pattern Designer - 1466 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 93 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1490 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- mafe - 236 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- shipwright - 198 entries
- Todd A. Clippinger - 197 entries
- Rustic - 186 entries
- stefang - 185 entries
- Chris Davis - 183 entries
- BritBoxmaker - 177 entries
- PurpLev - 163 entries