I was ready to start on my end tables but I wanted to practice first. The end tables are quarter sawn oak. I don’t want to screw up so I need to experiment with a cheaper project first. I will also be making an intarsia project. For a long time I have wanted to make a map of Wisconsin with each county cut from a separate piece of wood. I know it’s not very original but I’ve seen a finished project and it looked pretty cool. I bought some shorts from the lumber yard. Th...
Every wood worker has to start somewhere. My somewhere began with the purchase of a Shop Smith and this began the evolution of my woodworking tools. My mother and father had a friend that was selling their Shop Smith multi tool system back in the mid 1990’s and I was lucky enough to purchase it. This Shop Smith is perfect for doing small projects but not big construction jobs like I was used to. I decided that buying this system gave me a reason to put my creativeness to work and begin doing ...
I have wanted to try to make one of these ornaments ever since I first saw them. They are so interesting, and everyone asks- “how did you do that”? I had trouble understanding a lot of the how-to descriptions, and even the videos were hard to follow. I found this one tutorial that I thought was good, and after about the 10th read-through I thought I’d grasped the concept.” http://www.ptwoodturners.org/Tips%20and%20Handouts/INSIDE-OUT.pdfOne of the first things I did wa...
I’m still pretty new out here, but I really enjoy the concept of the ‘tool gloat’, so I’ve decided to partake. This is (most of) my shop… It’s perpetually in a complete disaster state, but I suppose that’s a good thing… means that things are getting done. We’ll start the tour at the most terrifying thing in the place… the 14” table saw… This, like pretty much everything else in here, was acquired by my dad about...
Well, thanks for the great welcome. Found this forum searching for solutions to some issues as I started upgrading the shop, and thought it would be a good source of information and camaraderie. I checked out some of the threads, such as “You know you’re LumberJock if/when…”. That made me wonder…would I fit in. Am I … er, ah …. crazy enough, you know…obsessed? Then realizing that yesterday I dumped a whole quart ($15) of Watco into the bottomless pit of MDF that is my new radial arm tab...
Just playing around in the shop and came accross these planes. I made them a couple years ago, and really enjoyed it. Nothing too fancy, and the basic plans came from a book on making hand planes. They are a pleasure to use as the shavings come peeling through the throat opening. That nice whoosh sound that only planes make, and shavings thin enough to read through! And a polished surface that’s left behind. So much satisfaction in using them, knowing you made them. ...
- My Journey As A Scroll Saw Pattern Designer - 1660 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1685 entries
- frank - 417 entries
- dbhost - 400 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 281 entries
- William - 258 entries
- shipwright - 229 entries
- Betsy - 226 entries
- Stevinmarin - 212 entries
- stefang - 207 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 201 entries
- robscastle - 189 entries
- Rustic - 189 entries
- BritBoxmaker - 188 entries
- Chris Davis - 184 entries