My wife and I have been sharing my workbench out in the garage for my woodworking projects as well as her jewelry making projects for a while now but we both decided it was time for her to have her own workbench. We looked around online and found some nice looking jeweler’s benches but of course I said: “I could just build you one of those.”, so here we are. I quickly looked around for some plans but didn’t find any so I just had her pick out the one she liked best and...
well unfortunately i will not be able to have the table saw station that i was hoping for but a router table is something i need so i am making one on the side of my table saw. i started by cutting down all the MDF with my cousin pat’s (Anthrax) help. then i started putting the torsion box together. it is all based on where the bolts are for my table saw and in the center fitted for the rockler plate that i am planning on getting in the future just i don’t have the money now. so h...
Well, I procrastinated on this little project enough. Our two year old son, Mot Jr. (aka The Vandal,) needs a Christmas Gift from the shop. My daughter wants an iPod. What’s a guy to do. I settled on a plan from Lee Valley for a nice little rocker and started the build 2 nights ago. I started by grabbing some wood from the rack. I chose red oak because it’s what I have in abundance and after an attempt to resist it’s downfalls, I’ve become quite used to working...
Fly fishing is one of my other hobbies and like wood working, it can be very expensive. Thankfully, I’ve been fly fishing for close to 25 years and gradually acquired some really great gear that will last a lifetime. To keep costs under control, I like to tie my own flies and build as much of my own gear as possible. I built a custom fly rod back in 1998, and it is still my favorite (a 9ft 6wt on a Winston 3-piece LT blank). I was able to save 60% off the stock rod by building it ...
I decided to add a coffee table to my set with some of my extra lumber. The kids and I spent the day sanding and priming all the furniture. Tomorrow is painting day! Can’t wait to see them in my backyard by Sunday evening.
It took me nine days from start to finish, but I’m finally done with my Adirondack Patio Set. I am really tired of painting too! The chairs are sitting by the pool where they and I will be spending Memorial Day. Hunter and Huckleberry, my English Springer Spaniels, approve. Can anyone tell me if there is a way to format my photos so the right 1/3 of the picture doesn’t get cut off when I link them in my blog? If not, I guess I’ll have to make sure all the im...
...have been thrown in so far. I’ve had about thirty kids place hands on it so far, including to visually-impaired students today. I didn’t expect them so I didn’t prep anything for them to do. After a little scrounging around, I was able to get them to do the sanding/masking work on the rims. Last week saw the finished paintjob. The blue paint took around three coats to cover well, while the yellow pinstripe was created using masking tape and Rustoleum Pro Yellow spr...
One of Charlene’s friends from a college years ago has two kids who’ve recently graduated from high school. The elder dived into travelling around Europe and heading off to college on the other coast and generally diving into life. The younger, Daniel, is an Eagle Scout, but post high-school has been casting around trying to figure out what he wants to do. He’s been feeling stuck in a small town up in the Sierra foothills, and we’ve dragged him down to closer to the co...
Hello again all, After thinking about and looking at the suggestions provided, I decided to take a piece of one suggestion and run with it. I am going to take this 8’ board and turn it into a couch table—kinda. Ulimately this will end up being four separate tables linked together by puzzle piece cutouts. If you want one table about 24 inches square, you only use one part of the table. If you need a longer table (maybe for serving at a party) you can piece together up to all fou...
Well it took me almost 2 weeks to get the shop reorganized after the delivery of a new table saw and a great set of cabinets I was given from a local school. That ate up most of my time but I’m back on the Big Board project. I got out the circular saw and squared all my edges and was able to arrive at the final overall shape. When the four pieces are assembled and next to each other, it will have this basic design. Extra curves and obviously legs will be coming soon. My next c...
- My Journey As A Scroll Saw Pattern Designer - 1462 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 93 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1486 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- mafe - 236 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- shipwright - 198 entries
- Todd A. Clippinger - 197 entries
- Rustic - 186 entries
- stefang - 185 entries
- Chris Davis - 183 entries
- BritBoxmaker - 176 entries
- PurpLev - 163 entries