LumberJocks

Woodworking blog entries tagged with 'jet'

  • Advertise with us
View PurpLev's profile

Dust Collection #3: Fine!....... particles that is

1598 days ago by PurpLev | 32 comments »

After many months in the planning, designing, and reding on other peoples builds of air cleaners, the day before Thanksgiving I came upon an ad on craigslist of a JDS Air-Tech 2000 Model 750. I figured that if I was to build one – it would end up costing about as much as the JDS model, but will not have the same filtration quality, it’ll be heavier (wood construction as opposed to metal frame), and it’ll take me time to build it. time that could be used to build woodworking ...

Read this entry »


View Bill's profile

To Domino or not to Domino

2530 days ago by Bill | 29 comments »

Ok, so I am sitting here weighing the costs of some tools. On the one hand, the Festool Domino set with dominos, guides, and a dust collector for approximately $1300. On the other hand, I need a table saw and a planer. The money for the domino would likely cover these items. Which way do I go? The Domino would allow me to do mortise and tennon joints much more easily than now. It would have the greater flexibility of positions, large sizes, etc. compared to the mortise machine. But ...

Read this entry »


View PurpLev's profile

Dust Collection #2: infiltration.... filter me this, filter me that

1920 days ago by PurpLev | 28 comments »

I ordered a 0.3 micron replacement filter from Wynn Environmental to replace my Jet DC1100 30 micron bag. Originally I was going to make a simple review for people to benefit from my experience with the new filter I got… but since it had gotten a bit more complicated, I figured this is blog-worthy, and the ‘regular’ review will follow once I experience more the performance of the filter. Disclaimer: I have had nothing but great experience from Wynn Environmental, from ...

Read this entry »


View Dorje's profile

Lathest Addition to the Shop...

2356 days ago by Dorje | 26 comments »

My wife bought me this Jet 1642 EVS lathe last month…I love it! She really likes bowls – thank goodness! She didn’t think that I should get the 14”er that I had been planning on for the past year or so… The first day that I went out to play (set it up and turn it on), it wouldn’t run! Turns out that it wouldn’t run off of the GFI circuit that runs to the shop…I had to run a new standard circuit out there from the panel in the house ̵...

Read this entry »


View Gary Fixler's profile

My Tools #6: Jet 16-32 drum sander

1380 days ago by Gary Fixler | 19 comments »

Mom visited a couple of weeks back for 10 days. She tends to come out once per year in the summer to see me, her only son. She helped me replace some broken things in my continuing “everything’s breaking” period (broke a bit last week on the mill – pricey, too – my computer a week or two before that, and my TV shortly before that, sigh…). Then over dinner for her birthday somewhere nice we talked about woodworking, and my idea for making some things like cu...

Read this entry »


View Blake's profile

Seeking Advice on Thickness Sanders

2354 days ago by Blake | 19 comments »

I have been saving my pennies for a thickness sander. I really need one for surfacing small stock for boxes. There seems to be only two (and a half) models in my price range: Grizzly G0459 12” and the Performax 628900 Mini 10-Inch (which as far as I can tell is identical to the Jet 10-20 Plus?) Grizzly G0459 12”: $495.00 on Amazon plus shipping, only one review (5 star). Performax 628900 Mini 10-Inch: $499.99 on Amazon with free shipping, reviews state tracking problems. ...

Read this entry »


View Arbo's profile

Radio Control Jet....

1278 days ago by Arbo | 17 comments »

Years and years ago I drew up plans for a wood built model of an X-29 jet. There were issues back then and it was never successful. Recently I brought this one out of mothballs and started building a new one with needed changes. Yeah, it’s not woodworking as one might think of it, but it is ply and balsa, which is wood. ;) Need to cut and attach the wings, fiberglass the whole thing, cut control surfaces and put in the electronics…

Read this entry »


View DS's profile

CL Find -- NEW (to me) Tablesaw. Jet JWSS-10FLR

800 days ago by DS | 14 comments »

Well, the old 2.5hp Craftsman 10” TS is now retired. It was beginning to fall apart and no amount of JB weld or duct tape was gonna keep it going much longer. Its last project—Stumpy’s Tubafore contest. (Being as I won the contest, I figured maybe it was time to get the kind of respectable tools that such a station deserves. heheh Ok, maybe a little better saw than that—No offense Stumpy) I’d been lurking on CL for almost a year trying to decide what to get...

Read this entry »


View designerboy's profile

Jet 18 inch Bandsaw (Baby!)

2265 days ago by designerboy | 13 comments »

FIRST BLOG ever, so bear with me… Well This week (tues 5/2/08) I will be collecting my new Jet 18 inch Bandsaw. I have a close friend that made a great spot on a spec sheet that I thought I shouldpass on (if your‘re not learning, what is the point!).I always go the way of bigger is better (ie more capacity/power and I will then notreach the tools limits which means I will have these tools for at least my lifetime.)something I picked up from my old man, anyway… But I learn...

Read this entry »


View Gary Fixler's profile

My Tools #2: My Christmas present from mom finally arrived!

1520 days ago by Gary Fixler | 11 comments »

It’s the JET – JSG-96CS: 6’’ x 48’’ Belt / 9’’ Disc Sander w/ Closed Stand, 3/4HP 1Ph, 115V. It arrived by pallet in two boxes: Right away the 3/4HP motor and belt seemed bigger than I’d imagined this past year or two (this has been on my wishlist for awhile now). I had even scaled up my mental image, but it was still bigger than I thought: The closed stand is a very thick sheet metal, and heavier than I expected. It was a...

Read this entry »


1 2 3 next »
30 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase