Japanese toolbox大工の道具箱 Here we are part three of the build.Last blog we made the drawer lock parts and other stuff, now it’s time for drawer parts and the nailing of the box. This was where we left last, right there on the floor. Drawer parts ready, front with wood lock made. And here is the drawing I made for the drawer, following traditional Japanese cabinetmaker ways. The drawer back gets its rabbet.And I get to test my Veritas mini shoulder plane (it works fantast...
Japanese planing boardJapanese workbench Ok as promised I will continue the Japanese blog series.It all started by me reading Toshio Odate’s book ‘Japanese woodworking tools their tradition spirit and use’, and now since I have moved to a new location where I at least for a while will have no workshop, the story will continue since I plan on using Japanese tools and methods in the meantime. Get started MaFe. So to work with my Japanese tools, I needed Japanese ‘set ...
Japanese toolbox大工の道具箱 I have been looking forward for a while to make this blog, this because the result is one of my favorite woodworking projects, it was like a sum of skills leaned and also a design and history challenge that I enjoyed.The result is something I am proud of and that I think will stay with me for as long as I live. At first I made this small one out of trash wood in Paris, meant for chisels. Later another as a gift for a friend http://lumberjocks.com/mafe/blog/2501...
Japanese toolbox大工の道具箱 As I wrote in the first part – I have been looking forward to make this blog, so here we go. My conclusion was:Low price light weight wood: pine.Thin planed boards for low weight.No hardware.Size that I can easy carry.Proportions slim for elegancy.A drawer for small things, and for giving myself a challenge of traditional Japanese drawer making.Finally I choose to buy a bag of bamboo nails, this to try the traditional way, for beauty and again for giving mys...
Japanese toolbox大工の道具箱 Here we are part two of the build.Last blog we made the basic box parts, now it’s time for handles, drawer and another little challenge. This was where we left last blog, the basic box. Ok a piece of wood same as the box for the handles. And some spacers also.(This time cutting on a German saw). Gluing spacers to the back of the handles. Clamps, clamps and clamps…Gluing the batterns to the lid and spacers to the handles. Top and end ...
Japanese saw horsesfloor horses This time low saw horses, these are for Japanese woodworking, and so they are meant to keep the items in good position for sitting work and for bend, standing jobs like rip cut with a Japanese saw. Once more a roof rafter that a friend gave me nice thick wood and wide also, the same as I used for my shaving horse (thank you Jakob).First step is to mark up careful with pen and Sashigane (Japanese square).And do not forget a cold beer…. Now sin...
So as I have mentioned in previous blogs, I have been studying and collecting Japanese hand tools. And my favorite book which has inspired the collection is JAPANESE WOODWORKING TOOLS by Toshio Odate. In this book there is a section on saws (Nokogiri) where Odate proudly displays a favorite in his collection: This saw was a rip saw used to mill large stock. The wide blade was designed to keep the cut straight in very thick lumber. It was used by the mighty kobiki-shokunin (s...
Just found this great resource for traditional Japanese joinery. Lots of good pictures and some nice projects he’s done there too. Found it via this page after a google for tome tsugi. Enjoy! Here is a VRML viewer for the animations
Let me start by saying that the first part of this blog although posted earlier today, was actually made about a year ago, I just posted it today as a preceding part to the one you’re reading now… tried not to double post and ‘push’ other’s from the blog front page, so I waited half a day between 2 posts, although both were made ready at the same time. to continue the story were I left off, what I found most difficult with setting up the box was the box joints...
After I got bit by the woodworking bug a few months ago I’ve been scrambling to figure out how to start making stuff given that I live in a 3rd floor one bedroom apartment with my fiance in San Francisco (and having no hand skills whatsoever). I hope this entry helps inspire others in a similar situation that it can be done, but please don’t look at this blog or my projects for any tips on technique. I’m sure I’ve made every mistake in the book—but all while havi...
- My Journey As A Scroll Saw Pattern Designer - 1558 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1583 entries
- frank - 417 entries
- degoose - 395 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 275 entries
- William - 258 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- shipwright - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 188 entries
- Rustic - 188 entries
- Chris Davis - 183 entries
- BritBoxmaker - 181 entries
- Smitty_Cabinetshop - 175 entries