LumberJocks

Woodworking blog entries tagged with 'it'

  • Advertise with us
View droogs's profile

The Tinker's Apprentice #2: My Dilemma

04-07-2015 08:50 PM by droogs | 1 comment »

Having had my “road to Damascus” moment, the realisation dawned on me that although I had just had a world beating business idea; I in fact had absolutely no way in which to achieve its fruition. After all, here was I with no tools at all, other than a very worn Phillips screwdriver, a decrepit claw hammer, a knock-off 12mm Marples “blue” bevelled chisel (with sides that could only be described as having been ground using the kerb) and a rather cheap and nasty ¼” drive socket set missing the ...

Read this entry »


View droogs's profile

The Tinker's Apprentice #1: A Beginning

04-03-2015 06:37 PM by droogs | 2 comments »

Where to start? At the beginning I suppose. Well, not the very beginning as that would entail going all the way back to a rather dreary wet Tuesday afternoon (and it was, I’ve checked) in an equally dreary and dank tenement building in Glasgow in 1968. For you dear reader I think perhaps that that may be a little too far and not very interesting and it would also be definitely far off the mark, as far as the subject of this tome to come is concerned, as could be. So, I guess I will begin s...

Read this entry »


View A Slice of Wood Workshop's profile

You Design It, I Build It project #4: And the winner is.....

08-13-2012 06:48 PM by A Slice of Wood Workshop | 2 comments »

After a tough fight between the hall table and the bench, the hall table has won. At the beginning the bench took a quick lead, but then failed to hold it as the hall table easily passed it. Now it is on to the next stage, the actual design of it. I will be figuring out how I will do this and then post more about the next step. Thank you to all who participated so far and please keep on participating.

Read this entry »


View A Slice of Wood Workshop's profile

You Design It, I Build It project #3: The options are in, time to vote!

08-06-2012 08:07 PM by A Slice of Wood Workshop | 0 comments »

The options are in and it is now time to vote for the project you want to see built. There is a poll on my blog (on the sidebar) that has the options to choose from. Click here to hop on over to the blog.

Read this entry »


View A Slice of Wood Workshop's profile

You Design It, I Build It project #2: Last Day For Ideas

08-03-2012 11:52 AM by A Slice of Wood Workshop | 0 comments »

Just wanted to remind everyone that today is the last day for the “You design it, I build it” project. I will put a poll up on Sunday for everyone to vote on what type of project we will be doing. So far I’ve had a bench, hall table, corn hole game, and 2 side tables. Leave any ideas that you have and I’ll add it to the list.

Read this entry »


View Mark A. DeCou's profile

A Scrimshaw Art Journey: What it is & How to Do it; Five Simple Steps to Success

11-11-2007 11:27 PM by Mark A. DeCou | 17 comments »

A Scrimshaw Art Journey: A Lumberjock’s “Short Version” of the Techniques for Decorating a Powder Horn by: Mark A. DeCouwww.decoustudio.com (This writing, photos, and artwork are protected by copyright by M.A. DeCou 2007-2010, all rights reserved, please ask permission before using any part or component.) =============================== UPDATE 9-25-2012:This past summer I had four students at the John C. Campbell Folk School class on Powder Horn Building and Scr...

Read this entry »


View cckeele's profile

Have we lost our woodworking ways

10-21-2007 07:36 PM by cckeele | 32 comments »

These days it would seem that we have a never ending need to spend thousands of dollars on accessories for our already costly tools. I am particularly concerned in the areas of push sticks, block planes, router fingers, jigs etc..Am I the only one who is shocked and awed when I see the price tags on the latest line of accessories. It seems alot of people are just giving in and buying alot of items that they could probably just make out of scrap material. There is no lack of talent on this web...

Read this entry »


View Mark A. DeCou's profile

Making Your Own Hardware, a Hammered Copper Finger Pull for the Tilt Front Laptop Computer Desk

10-13-2007 06:25 AM by Mark A. DeCou | 27 comments »

Over the past few years, I have had the chance to build my own door handles out of copper for several commissioned art-furniture pieces. This is something I enjoy doing, and it gives my work another niche to offer. I would not say that I am a coppersmith, as there is a lot that I don’t know about the process. I am almost completely self-taught, so there is bound to be a lot I haven’t learned yet. I bought two old reprinted books on the subject of coppersmithing, and I think ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com