Cutting timber to size LtoR- Walnut, Maple, Cherry for the butchers block & Poplar for the base Base assembly – Sorry forgot to take photos of turning on the Shopsmith Farrow & Ball paint: Downpipe, Satin polyurethane varnish on the drawer Oak drawer tilt guide & drawer runners Base done Cut to 2”x2” Clamps Glue & paint roller Clamps Plane Maple cut to 4” strips Walnut Clamping Add some Walnut More clamping ...
Step 1- find a giant elm FOUND ONE! I believe it to be a piece of this one. I’m working on confirming it. http://www.canada.com/story_print.html?id=ed5f1cca-2ff3-4a5c-a572-e59f074d0bca&sponsor step 2 – find a giant saw FOUND ONE! step 3- fire it up! step 4- get some rest and get back at it tomorrow. More to come….......
Hello everyone. This is my Antique blue butcher block counter. This is one of the new woodworking plans I have posted on Sawtooth Ideas. By the way, if anyone is interested in posting woodworking plans for profit on the internet, check them out. It is free to post the plans and they are easy to work with.This is a smaller version of a counter that I built for a pie shop. This one features two boxes that pull out from either side and has a towel bar on one side and hooks on the other. I p...
So im slowly getting into woodworking. Its something i have done to a small extent all my life, thanks to my dad who has always been pro in my eyes. Anyway, this is the first large project i have ever undertaken on my own. I decided to build it for my wife for valentines since we have almost NO counter space in our house… We moved in to an older home about a year ago and although the kithen is fairly large, there was no place for her to prepare meals and so forth. I got the plans on...
The mother-in-law has been nagging me to build this “table” for about a year. The problem is, she wants something different every time I talk to her about it. She’s settled on 79”x30” at about 38” tall. She wants square legs, 3 sides enclosed, and two shelves. Oh, and she wants it made out of knotty pine to look distressed. So I started it last weekend. Went to Home Depot for some 2×6’s and 2×4’s. Then i glued then squared up ...
Buddy of mine gave me a chunk of bowling alley earlier this year. I was going to make Something out of it, and my wife asked if I would make a rolling kitchen island to replace our kitchen table. It needed a little cleanup on the ends, and I lucked out, only barely nicking this nail with a router bit. The plan is for it to be counter height: I decided to do a decorative treatment on the ends of the rails, somewhat ‘greene and greene’ influenced, but just out o...
The “Island” is the land that accompanies Lethenty Mill. It stretches from its widest part at the Mill to its narrowest about half a mile up the Lochter Burn. It used to be very important to the Mill; water was collected in a long narrow channel leading to a dam near the Mill, and it could be released into a variety of channels under and around the Mill which were arranged to feed the water to the two water wheels or back into the water course (the Lochter) if the system was full and li...
Here are some pictures of the cabinets I built! Unfortunately, the builder hadn’t gotten some of the appliances, so the photographer was unable to get pictures of the bar, and one side of the island where the microwave sits. I hope that once they are in, I can get him back in for some more pictures. The kitchen. The island is a very deep blue, and distressed on all edges. The corner posts are chamfered. The granite on the island is one of the most beautiful pieces I’ve see...
Today was a big day! I finally installed the cabinets for my first full kitchen today! Rolly, our finisher, painted them at the end of last week. I am still waiting for the drawer guides to be delivered, along with the lazy susan hardware and the knobs, pulls, and shelf pegs. Also, the blue paint on the island is taking FOREVER to cure, so I haven’t taken those doors or the panels that will go on the sides to the jobsite yet. Oh, and I still have toe kicks and crown molding to go ...
- My Journey As A Scroll Saw Pattern Designer - 1582 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1607 entries
- frank - 417 entries
- degoose - 396 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 278 entries
- William - 258 entries
- Betsy - 221 entries
- shipwright - 213 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 185 entries
- Chris Davis - 183 entries
- Smitty_Cabinetshop - 176 entries