347 days ago
by gizmodyne |
10 comments »
I finally got around to dealing with this mess. (I just noticed that I posted the last post for this project 385 days ago!)Kristin is patient, but she has been asking me to stain and install the doors. I had some fitting to do, along with a week or so of staining/ finishing before install time. (not to mention dropping/breaking/rebuilding/ one door).Installing the Z-braces on the inside of the doors. First to install a door stop for the doors to close against. If I could do it all over I woul...
Read this entry »
741 days ago
by gizmodyne |
10 comments »
The installation of the diswasher finally begins.
The first step: nailing a steam shield to the bottom of the counter.
I spent a lot of time leveling and fussing with the machine. Here you see me marking the plastic templates that come with the machine. It helps to set the height of the panel. It is marked and then attached to the metal harness.
Finding the centerline on the back of the panel.
Setting the harness. It is alligned along the center line and the marks from the pla...
Read this entry »
107 days ago
by Gary Fixler |
7 comments »
At 17m long, TREE is London’s Natural History Museum’s largest botanical specimen. It is a wafer-thin shaving through the entire 200 year old tree from roots to branch tips. The video shows Tania Kovats’ journey through finding the tree, deciding how to bring it down, learning how to have it resawn, CNC machined thin, and dried, and the ultimate hanging on the ceiling of the mezzanine gallery behind the Central Hall. Quite some board feet she left behind at the mill. She...
Read this entry »
733 days ago
by gizmodyne |
7 comments »
Tilt Outs
I started the tilt outs optimisticaly. I began by making filler strips to bring the hinges flush to the face frame.
Setting the hinge.
After lots of adjusting (3 hours) I got the drawer to fit reasonably well. The weird thing about these hinges is that they dont just tilt. They kind of tilt, slide down, and then push in. They are more intended for overlay applications and really should have been installed prior to the cabinet installation. I had to cut down the drawer front...
Read this entry »
256 days ago
by gizmodyne |
5 comments »
If you remember the last time I fit the doors in…..They were all dinged up and “beyond repair.”
Well a hammer and saw later(see last blog) and they were ready to stain.
Procedure: Washcoat, two coats gel stain, shellac, poly.
FrankenHingesNothing comes easy around here. I knew the shape of the original hinges but could not find a supplier. So I order two different types of hinges from rejuvenation…
Check out the video of how I mixed the two hinges. Not rocke...
Read this entry »
