03-17-2013 05:29 PM
by twobyfour16 |
0 comments »
So, I recently built a new cedar gate & needed some handles. I didn’t want to go out & buy some, so decided to make my own. Inspired by “http://lumberjocks.com/projects/48854” CaptainAhab’s handles, I ended up with:Here’s how I built them:Starting with a lamination of 3 pieces of clear Cedar which I planed down to about 2 1/8” thick:Obviously, I made a little template for the top curves out of 1/4” plywood & cut the top curve with the ban...
Read this entry »
03-13-2013 04:30 AM
by Smitty_Cabinetshop |
65 comments »
Last time I messed with the Stanley #444, the side walls of groove were pretty ratty. Not that they’d be seen, of course, but the product means the nickers aren’t sufficiently sharp.
A little work on the fine DMT showed it wasn’t flat on the outer surface of either of the two nickers.
I worked each just enough to get the surfaces flat.
Then I carefully worked the primary bevels of each on the fine DMT. They’ve got a ‘camber’ to them alr...
Read this entry »
01-31-2013 07:41 PM
by ScottShaeffer |
1 comment »
In this video Scott Shaeffer is joined by Kris Williams from Rocky Blue Woodworks who introduces us to various table top finishes. We’ll also be talking about how to build an aspen table top appropriately for an epoxy finish!
This video is 1 of 2 in the series. To see more from Kris, follow this link: http://www.rockybluewoodworks.com/
This video is 2 of 2.
See the full tutorial by following this link: http://logfurniturehowto.com/tutorial/how-to-apply-epoxy-finish/
Read this entry »
01-31-2013 07:38 PM
by ScottShaeffer |
2 comments »
In this tutorial, Scott shows in much more detail how to craft the puzzle-cut shelf. This technique can also be used for dresser sides, door panels, or anywhere else you might need a really awesome panel.
See the full tutorial by following this link: http://logfurniturehowto.com/tutorial/learn-how-to-make-a-puzzle-cut-shelf/
Read this entry »
01-31-2013 07:35 PM
by ScottShaeffer |
0 comments »
Tenon cutters are quick but sloppy. See how-to carve a tenon using a draw knife that will look great and fit tight!
See the full tutorial by following this link: http://logfurniturehowto.com/tutorial/learn-how-to-carve-a-tenon/
Read this entry »
01-30-2013 09:37 AM
by ScottShaeffer |
2 comments »
I designed a log clamp to hold logs that are too big for the lathe. My friend, Mitchel Dillman over at Colorado Rock*N Logs fabricated it for me. See how to use it to carve a tenon in this video!
Please visit my website and FaceBook Page. Thanks!
Read this entry »
12-16-2012 07:46 PM
by Dave Owen |
4 comments »
A year or so ago I wrote about “Tops”, describing how simple, small, hand-spun tops can be easily made using 1-1/2” diameter wooden wheels and 2” lengths of ¼” dowels (sharpened on one end and chamfered on the other). The tops I made for our toy drive last year and the first fifty or so I made this year, were decorated by applying rings of marker colors to tops spun in a drill..The easiest way to sharpen and chamfer the axle before inserting into the wheel, is to lightly grip it in a drill c...
Read this entry »
12-13-2012 07:11 PM
by Bob Simmons |
6 comments »
The Cosmati wood inlay banding is glued up in part 2 of this YouTube woodworking video. Watch how the wood segments are fit together to form the wood inlay banding log.
See how the decorative pattern of the Cosmati design comes to life in this episode. You will see the woodworking method for gluing and clamping as demonstrated by the woodworker. Cauls with applied packing tape are used to distribute even clamping pressure to all glued segments. The clear packing tape protects the cauls ...
Read this entry »
12-07-2012 11:17 PM
by Bob Simmons |
3 comments »
Learn how to make a Cosmati design for wood inlay banding. Discover how to inlay a wood inlay banding to customize your fine woodworking projects that you make in the workshop.
The Cosmati or Cosmatesque design for this inlay banding derives from one of the beautiful patterns of marble inlay that are in many of the churches of Rome, Italy. There were four generations of the Cosmati family that were marble setters during the middle ages. This family of craftsmen produced outstanding wo...
Read this entry »
06-12-2012 02:58 PM
by Paul Sellers |
12 comments »
Making the Workbench with Paul Sellers
If the video below is not working please use this link: http://www.youtube.com/watch?v=ru2ZiNsWek
This replicates my personal workbench, one I have used and preferred over all others for, well, actually, half a century. Let’s talk briefly about benches and specifically working workbenches and not images of what a bench should be. Anyone can build any bench type they like, regardless of whether it works well or not, is big and clunky and la...
Read this entry »
« prev
1 2 3
next »
25 entries