I promised in my letter below to share with everyone I know my home depot shopping experience, so here you go! To whom it may concern, I wanted to share with you my shopping experience at the Fayetteville, GA Home Depot store. A couple weeks ago I purchased a Ridgid oscillating spindle sander from this same store. After a couple weeks of using the tool (and enjoying it very much) it came time to buy more sandpaper sleeves for the sander. After doing a quick check of the Home Depo...
I had a Ryobi 14 Amp 10 in. Compound Mitre Saw. It was working fine but could only cut a max of 5 inches wide boards. I was in the market for a new on but all of the sliding miter saw was so costly. I even considered a Harbor Freight one, but even at that it was a $100 and more for one. I decided to check out craigslist.com and found a Kobalt one there for s feel. Well, after I got home I found out why it was so cheap – it was not square. I tried a couple of time to square it up but it...
5th Annual NIAGARA WOODWORKING SHOW SATURDAY OCTOBER 30, 2010Niagara Falls HOME DEPOT7190 Morrison Street L2E 7K510:00 am – 4:00 pm Lumberjock Meet and GreetWhere in the world is MsDebbieP?Debbie is planning to attend and is asking if anyone wants to do lunch? Woodworking CompetitionTwo categories to enter: Small Project (has to fit inside a 2ft square box) Large Project (greater than a 2ft square box)PRIZES! PRIZES! and more P...
Not too long ago I purchased a pair of Ridgid lithium ion drills and diligently filled in the lifetime warranty and submitted same to the offices in the U.S.Today I recieved via my e-mail a 20% off offer from Ridgid as follows:From wood stuff 2010Excited by the offer I hastened to the website only to find this:From wood stuff 2010 They took my money from a Canadian Home Depot, they sent my warranty acknowledgement ,then promptly refused to give me the same treatment as all of their other cu...
NEWS from CPSCU.S. Consumer Product Safety CommissionOffice of Communications Washington, D.C. ———————————————————————————————————————— FOR IMMEDIATE RELEASEDecember 6, 2012Release #13-059 Firm’s Recall Hotline: (800) 597-9624CPSC Recall Hotlin...
Consumerist.com article about my recent experience with HomeDepot Below is the letter I sent to HomeDepot’s CEO. I wasn’t expecting much out of them but instead they just gave me the tool I tried to order. I even offered to pay for it but they wouldn’t take my money. Good afternoon Mr. Blake, Earlier this week I ordered a Work Sharp 3000 from HomeDepot.com (order number W118122508) after finding out that that the tool was on sale. The website indicated that this too...
3rd Annual Home Depot Woodworking Show SATURDAY OCTOBER 25, 2008St.Catharines HOME DEPOT20 YMCA Dr.L2N 7R610:00 am – 4:00 pm Woodworking CompetitionTwo categories to enter: -Small Project (has to fit inside a 2ft square box) -Large Project (greater than a 2ft square box)PRIZES! PRIZES! and more PRIZES! Make something great and come show it off! Woodworking SeminarsHow to sharpen your chisels and blades 11:00-12:00Introduction to the scroll saw 12:00-1:00How to s...
NIAGARA WOODWORKING SHOW SATURDAY NOVEMBER 5, 2011 Niagara Falls Home Depot 7190 Morrison Street 10:00 am – 4:00 pm Woodworking Competition PRIZES! PRIZES! and more PRIZES! Woodworking Seminars All Day Demonstrations Kid’s Workshop www.niagarawoodshow.info
—————-NEWS from CPSC—————-U.S. Consumer Product Safety CommissionOffice of Communications4330 East West Highway, Bethesda, MD 20814www.cpsc.govRecalled Products Sold by Home Depot After Recalls Were Announcedhttp://www.cpsc.gov/en/Recalls/2016/Recalled-Products-Sold-by-Home-Depot-After-Recalls-Were-Announced/ Release Date: November 18, 2015Release Number: 16-039 Recalled Products Sold by Home Depot After Recalls Were Announcedh...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 107 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 80 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 420 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 246 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 214 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 194 entries
- A Slice of Wood Workshop - 190 entries