673 days ago
by Mike Lingenfelter |
13 comments »
Well I started the first step in building the Holtzapffel workbench. I went out last weekend and picked up some Douglas Fir for the bench and started to mill it up. I choose Douglas Fir for a couple reasons. First it was pretty cheap, I only spent about $150 on the lumber. Secondly, its a stable and stiff wood, which is good for a bench. It is also pretty hard for a “softwood”. I also used Douglas Fir on the small bench I built as a sharpening station. I like how it turned ...
Read this entry »
624 days ago
by Damian Penney |
11 comments »
So I got my jointer blades back from the sharpener, Standard Saw Works, and they did a great job. It’s a cool store too and one of the storefront window displays is full of old wooden planes (I didn’t get a pic)
Once I got the blades back to the workshop I set about reinstalling them. My usual method is to use my dial indicator and twiddle with them for hours on end getting them just right but this time I tried a new approach which worked really well.
After I’d dropped...
Read this entry »
736 days ago
by Olaf Gradin |
6 comments »
My first big project will be the Holtzapffel cabinetmaker's workbench. If you’ve kept up with Christopher Schwarz, you already know well what I am talking about. It’s a beautiful machine, and I want to start my shop off with this cornerstone of hand tool work.
I’ve long sought after the European benches you see in the magazines, but the money put them well outside of my reach. Just as I was about to fold and build a modern design on the same, I found some articles rega...
Read this entry »
456 days ago
by Damian Penney |
17 comments »
So it’s been a long time since my last post, had a bit of down time where I went on vacation and did odds and ends but I’d been making slow and steady progress on the top.
I can’t believe how much trouble I had gluing a bunch of sticks together :) All my issues stemmed from the fact that I didn’t have a good way of surfacing such long pieces. My 6” jointer just wasn’t up to the task so I faffed around trying to do it other ways. I eventually used a huge ...
Read this entry »
544 days ago
by kem |
7 comments »
I’ve done a lot of work on the top since the last entry. I started by roughly flattening the bottom side of the top. This was my first big opportunity to use my handplanes and I learned a lot from the experience.
First, this took a lot of time. Part of it was my own inefficiency. I started by going diagonally across the surface but it was so uneven that it was just riding on the high boards. A more efficient way to start with the roughness caused by an uneven glue up is to plane leng...
Read this entry »
557 days ago
by kem |
4 comments »
I decided to start out with the legs, so I could get more practice milling the lumber and in gluing the pieces up before tackling the top. The idea with the legs is to sandwich a longer board in between two shorter boards to make a ready-made tenon.
Here are all of the pieces for the four legs milled up.
You can see some dark streaks in these pieces. Those are where I ran into sap pockets in the wood. I don’t know if that’s bad or not, but it is annoying.
I th...
Read this entry »
557 days ago
by kem |
4 comments »
It’s been over 7 weeks since my last entry, but it took about that long for the wood to dry out enough. For the first 3 weeks, the wood was drying very slowly probably because it was still cold out here in Denver.
In the mean time, I spent some time adding dust collection to the shop and also built this sweet sawbench/sawhorse from Chris Schwarz's design.
This gave me some good practice milling up the lumber and also with some finishing. I used the natural Watco Danish oil on ...
Read this entry »
632 days ago
by Damian Penney |
9 comments »
Made another trip to PALS for the rest of the lumber, and seeing as my lumber rack isn’t wide enough most of it is on the floor or just propped up at the moment. Here’s all the 8/4 stock waiting to be butchered.
I ran all my stock through Cutlist Plus and here’s what it came up with, not too much waste which is nice (and I’ll use whatever is left over eventually anyway)
You can click the Cutlist Pic for a bigger view. Some parts are doubled up because I n...
Read this entry »
663 days ago
by Mike Lingenfelter |
11 comments »
This weekend I have a little time to work in the shop. I have plans for the next couple of weekends, so it might be a little while before I can work on the bench again.
Today, I cut all of the legs and stretchers to size and cut the tenons on the legs and stretchers.
The Legs
The stretchers
I also had time to start to hog out the mortises. The first step was to mark out the mortises. I just used a combination square and the stretchers themselves to layout the mortises. The str...
Read this entry »
683 days ago
by Mike Lingenfelter |
14 comments »
I’ve decided to go with the Holtzapffel style bench, and I’m going to give the large wooden screws, on the face vise, a shot. I talked with Christopher Schwarz about them again and he just loves them. He gave me a couple of sources for the wooden screws. I don’t want to post their email addresses in this blog. If you send me a private message, I will give you the two names he gave me.
I will tell you they aren’t cheap. One guy has them for $125/each and the oth...
Read this entry »
1 2
12 entries
