Today we are creating bandings from scratch. We’ve got some ideas for the wood inlay designs so we are ripping on the table saw, sanding on the drum sander, and gluing. At some point we will cut banding segments on the dedicated miter saw and then gluing some more. Plus we will be doing a bit of video shoots for the next release. Feel free to stop by. visit…The Apprentice and The Journeyman ...........Learn more, Experience more!
My Journey As A Scroll Saw Pattern Designer #583: A Day Without Communication - Making Lemonade from Lemons
So you all thought I took the day off? I suppose that you could say that, although it wasn’t a choice of mine. It seems that the black cat must have really put her spell on my on Friday the 13th after all. Around 8pm Friday night the unthinkable happened – my internet went down. All of a sudden, I was getting the dreaded “server not found” error on my screen. When Keith checked his computer, it was the same thing. We fiddled with our modem a while and then I de...
Time to turn my attention to the back. The locking mortise and tenon had been designed and it was now time to cut the mortises in the sides of the back. They were marked thru the holes in the sides and tape placed on the back to give the ends of the mortises. Using the horizontal router table. A view from the side. All of the wedge key tenons were made long so they are now being cut to the appropriate length minus 1/8” to allow for the back to move. And cut the wedge tenons to the co...
Lots of vegetable gardening done in the past couple of months, and it could not wait, so the harp building project had to wait a while. Finally last week I got back into it after 6 weeks of seldom working on it. Now it is almost done- but let me go back to where I left off in March.I had these beautiful abalone mother-of-pearl wings provided to me by a fine Lumberjock. She also did a great blog about how to do inlays, and that was very helpful to me. I didn’t follow instructions exactly...
“Those who dream by day are cognizant of many things which escape those who dream only by night.” Edgar Allan Poe…American Writer, Poet, Editor (1809-1849) In this episode we are installing the decorative wood inlay bandings that we have created in the shop. The inlay bandings are going to be fit, cut, and installed into picture frames that are made from Camala, a Peruvian wood. Since we are doing production work it is important to have a convenient setup and in this i...
Let's Make Bandings of Wood Inlay #3: How to make Wood Inlay Bandings like the Buffard Freres of Paris
“Never underestimate the power of a single thought.” Ender Ilkay…(1966 – ) Salesman and Friend When I first saw these beautiful bandings I felt the excitement and the desire to learn similar to what I first felt when serving my woodworking apprenticeship. Obviously, these patterns are so remarkably unique. I thought to myself that these are truly great designs of highly trained craftsman who took the craft of woodworking to a much higher level. The Buffard Frere...
This is a project from a Fine Woodworking article. Sept/Oct 2009 #207, page 70 by Garrett Hack. I am learning how to do inlay. So far I have found that sharp tools are a must. Good light with a magnifying glass are necessary for my relatively old eyes. This is small detail work. I started with a drawing to determine dimensions for an inlay on the top face of a table leg.After I was happy with the drawing, I carefully laid out the dimensions and cut the recess 1/8” deep. Most of the...
OK, you have been asking. What I’ve been up to on the Thorsen G & G tables.So here are some misc pictures. Of the Holly Thorsen Greene and Greene Table.This is the boards that I was using to select the wood for the table. The table top boards The legs before the mortise cuts The legs with the pegs in place but not finished to a crown. The shelf support brackets with the mortise slots cut and the peg holes cut. Cutting the mortises with a square corner on the new Mortise m...
Holly – Ilex opaca I love this wood for trim and inlays on dark woods. It has almost no figure from grain pattern or color. Holly is a chalky white to a light shade of gray.The texture is very fine and uniform. It’s an easy wood to work with. Cuts clean and smooth with hand or power tools. Capable of a very smooth and hard surface. Flexible and strong, bends nicely. Very expensive but a little goes a long way as long as you are using it as stated above. You can also...
I’m going to use this blog post for my wood species wish list for some recommended types especially useful for making scale furniture. I find that I source information on the internet and promptly forget it once I come across an opportunity to use it…)Anyone who knows a great source for any of these can feel free to chime in with a link or connection to any of these materials. I’m going to post them one by one as I source, use and then evaluate my scale experience with the...
- My Journey As A Scroll Saw Pattern Designer - 1558 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1583 entries
- frank - 417 entries
- degoose - 395 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 275 entries
- William - 258 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- shipwright - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 188 entries
- Rustic - 188 entries
- Chris Davis - 183 entries
- BritBoxmaker - 181 entries
- Smitty_Cabinetshop - 175 entries