I managed to squeeze in a workshop update before the Thanksgiving holiday. Happy Thanksgiving, and enjoy!
Well, I tried out the tools I got from mom for my birthday recently. Of note: 1) My 1/2” Sorby Spindlemaster was not a good indicator of how the 3/4” and 1” behave. I’ve been using the 1/2” however I liked, never reading up on how to use it, nor watching any videos. I recently watched one and thought “Huh, I’ve been using it entirely wrong.” I’ve been holding it flat, and using a combination of things with both hands and the tool rest t...
Hey, I am a complete newbie to all the wood turning buisness but my dad has just got hooked on it as a hobbie. My dad has a lot of the tools nessasary but is missing a tool that he has wanted for a while. The tool has something to do with hollowing out a peice of wood to make a nice vace or anything with a hollowed out center. If someone could please give me any information or a link on such a tool or where to buy one that would be really helpful. Thanks!Rockydog
I am working on a commission project that required me to make a rather large hollow cylinder. It needed to be 9” in diameter with a 1/2” wall thickness, and about 11 inches long. The client wanted to use Jatoba, which I could only get in lumber, so I glued up an octagon to work from. That part as well as cutting the OD was simple, but hollowing out the interior was a challenge. I decided to set up my Jamieson deep hollowing rig, and then realized that I could also set ...
So fo the past while I have been sanding the body to shape. I was also doing anything I could to avoid facing the challenge of cutting the body apart. I was afraid of doing so because it is not a cheap chunk of wood, and also all the effort put into getting the shape correct shape made it more special. Then one day I decided it had to be done and I did it. And that new bandsaw got quite the workout. It did go better then I expected with the minor flaw here and there. after the walls were ...
In researching making my own hollowing tools I have come into one main problem. I am a wood worker and don’t have metal working tools (and no intention to). I have received a good amount feedback concerning the amount of heat I will need to get the rod in a malleable state. This is one my concerns, the other is drilling into the end of the rod.Today I went by several machine shops to see what the cost for bending and drilling the rods. I would tap the rods myself. None of them provide the ...
In anticipation of Trifern's upcoming class on hollow forms, I ordered the 1/2” hollowing set from John Jordan yesterday morning at 9:41 AM. About 15 minutes ago, the mailman dropped it at my front door – that’s a 25 hour turn around folks. That’s the straight and curved tool, a spare set of cutters, the 18” handle, and the sharpening jig. James
- My Journey As A Scroll Saw Pattern Designer - 1431 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 92 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1455 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- mafe - 230 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 197 entries
- shipwright - 192 entries
- Rustic - 186 entries
- Chris Davis - 183 entries
- stefang - 180 entries
- BritBoxmaker - 169 entries
- PurpLev - 163 entries