LumberJocks

Woodworking blog entries tagged with 'hold fast'

  • Advertise with us
View Mauricio's profile

Workbench Build - Splayed leg French Bench #9: Deadman, Cut Legs, Drill Screw and Holdfast Holes

745 days ago by Mauricio | 35 comments »

Hello again friends, I’m made a lot more progress since my last post so I will break it up into a couple of posts. These are pretty straight forward, I’ll let the pictures do most of the talking. Deadman: BrandonW gave me this piece of Jatoba when we first met, Thanks again Brandon! I decided to use it for my deadman. Here I’m using the Paul Sellers trick for a makeshift end vise, it works ok but I cant wait to have a wagon vise. Very dense wood but it planes...

Read this entry »


View mafe's profile

Workbench restore (Scandinavian style) #3: Holdfasts and leather grip.

657 days ago by mafe | 20 comments »

Scandinavian workbench restoreHoldfasts and leather grip. This part is about the holdfasts and leather grip for the end vice. Yes we are back at the new workshop, at the old workbench.In the center is a wonderful old holdfast I bought in Paris some years back and I have been waiting to get the chance to bring into use.I will get back to this later. Because I also bought this one in France, yes and one more I use on my shaving horse but that is a different story.I think the corner of ...

Read this entry »


View mafe's profile

Workbench restore (Scandinavian style) #4: Fixing the front vice...

655 days ago by mafe | 15 comments »

Scandinavian workbench restoreFixing the front vice. This part is the repair of the front vice and yes making it run smooth as a dream.(Some call the front vice a face vice). We are back at the bench, now with hold fast and more or less ready to use.But my front vice is missing it’s pressure plate. The really old benches did not have one of these but mine has the slide for it so it will be replaced. Here again you can see the underneath how it is really just a clamp attached to the t...

Read this entry »


View mafe's profile

Workbench restore (Scandinavian style) #5: Making bench dogs.

655 days ago by mafe | 13 comments »

Scandinavian workbench restoreMaking bench dogs. Time for bench dogs, the show must go on… First was to cut three pieces of wood into the right size.The bench dog holes total size and the length I choose to be app double the thickness of the bench top. On the left you see the only dog that came with the bench… I guess this dog cant bark a lot…So time to make some marking, now the shape comes and I simply follow the measures of the dog holes in the bench top. This time I use ...

Read this entry »


View mafe's profile

Drill press table and much more! #3: Hold down clamps (cheap version) blog

1469 days ago by mafe | 9 comments »

Hold down clamps!This story are based on a real bench drillpress, all you see are reality, and all at your own risk… So time for the last part for now, the hold down or hold fast clamps.My solution are quick and dirty…Two china clamps 2,5$, some work. First file of the little metalpiece, that makes sure the clamp cant part in two.(It’s at the end of the long silver arm). Then slide it of. Bore a hole thrugh, that fits, a bolt for your fence. Make the mounting,...

Read this entry »


View mafe's profile

Workbench restore (Scandinavian style) #6: One legged dead man walking…

650 days ago by mafe | 9 comments »

Scandinavian workbench restoreOne legged dead man walking… Ok some awful undertones in that name…Actually it is just a simple dead man for the new old workbench. Just a long piece of wood, not sure but think teak. Marking the center line. Drilling holes for every two inch or five cm. And a little dowel that fits the holes with a cross dowel that makes it easy to pull out. Use the end vice to hold it. Get the idea? Now it is just to use it.I udsed it for pla...

Read this entry »


View A Slice of Wood Workshop's profile

Hand Forged Woodworking Holdfast

305 days ago by A Slice of Wood Workshop | 4 comments »

I know this video is mostly blacksmithing, but it shows the process of how to create a holdfast for your workbench. This could easily be done in a coffee can forge or a brake drum forge. Thanks for checking it out and view the video HERE

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase