So a point was raised in my previous installment of this blog regarding tiling appearance of materials (once you assign your custom material to your model and scale it up you’d see the same material pattern repeat over and over again with distinct horizontal and vertical lines (the seams) that separate those repetitions. This tutorial will show you how to eliminate those seams from your materials, and make it possible to seamlessly tile your material over larger areas. I will show yo...
2012 is a big year for Britain. Not only are we hosting the Olympics, but we’re also celebrating the 60th anniversary of Queen Elizabeth II’s accession to the throne. It’s Her Majesty’s diamond jubilee. Even my wife is organizing a street party for around 200 residents and I’ve been roped into building all kinds of weird and wonderful things for the day. Yes folks, marquees will be erected, brass bands will strike up, flags will be waved and I’m sure we’ll all feel very patriotic by the end o...
After spending quite a bit of time researching the history of my W. Tyzack, Sons & Turner saws, I was looking forward to finding out about this Disston backsaw from across the pond. After all, we have the wonderfully detailed Disstonian Institute web site at our disposal. Yep, finding out about this backsaw was going to be easy, or so I thought. When I started my research, I obviously knew it was a Disston backsaw, but I had no idea what model. This is how the saw looked when it came i...
No pics yet or anything, but after looking at an ‘06 Ranger at the Ford dealer with 42k on it, I kind of fell for an ‘05 Tacoma with about 85k on it at the Toyota dealer. A little older, a bit more used, but it just had a lot more I wanted. It’s a certified pre-owned with 3yr/3k bumper-to-bumper, and 7yr/100k drivetrain warranties, power everything, AM/FM/CD, access cab – 2-door, but has a small back, and little half-doors that make loading things/passengers back there...
This saw plate is remarkably well preserved for its age, but it could benefit from a clean. I gathered the stuff I thought I might need, but all I used was the 3-IN-ONE degreaser foam, the Hammerite Rust Removal Gel, the green scouring pad, kitchen roll, and wet and dry paper (more than you see in the picture below). I start by spraying the plate with the degreaser. I have found that the rust remover works better on the first application if the surface has been degreased first. ...
Hi Lumberjocks! This is the High school that I got my first formal training in woodworking. This video shows the most popular features of the school. It’s too bad it doesn’t show the fabulous woodworking shops. They had every tool plus industrial sized machines. It didn’t only have woodworking, but Machine shop, Welding, blacksmith, sheet metal, electricity, foundry, Drafting, & Aeronautics. That’s about all I can think of now. I just thought of s...
Well I just researched via “tags” the book forums and there are a few on LJ’s…but they are mostly regarding skills books—-which makes sense for wood workers… But recently I have been dreaming of building a boat…on a 5 year plan (if you look at my projects you will see I am not ready lol)...and so I have been getting lots of books at my local library…on boat building and other titles too… But one of the books that I picked up is not a...
THE FINALE Repairing the Lamb’s TongueSo in my last post I’d fixed the large chip below the bottom saw nut. Now it was time to fix the chip on the lambs tongue. I started by paring the chipped surface flat with a chisel, then I ripped a section from an off-cut of beech dowel. Before gluing it onto the handle, I slid a hotel card key into the kerf where the saw plate goes. This served two purposes. Firstly, it ensured that I didn’t get excess squeeze out in the kerf whic...
My recent lumberjock postings of the walking cane work I have done recently has brought a lot of interest from folks wanting me to build them special, unique, elaborately detailed, walking canes and sticks. This new blog communicates the design process on one cane as I prepare to start the carving, and get approvals on the final design. The customer is a Youth Pastor, and needs to use a tall walking cane to support a bad knee. He and I have been designing this project for several weeks...
I was digging through a box of woodworking magazines and books that I had stashed away for the past ten years and came across a copy of Harry J Hobbs 1935 booklet “Working With Tools.” This is a 90 page guide to building things with hand tools. To buy all of the hand tools on the list of tools he suggests for a small shop and additional tools it would have cost you $33.75. Since the average yearly wage at that time was $1,600 a year, to set up a complete shop of hand tools it would cost ...
- My Journey As A Scroll Saw Pattern Designer - 1386 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- Just for Fun... - 84 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1409 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 389 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- mafe - 229 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 193 entries
- Rustic - 185 entries
- Chris Davis - 183 entries
- shipwright - 180 entries
- BritBoxmaker - 166 entries
- stefang - 164 entries
- PurpLev - 163 entries