After showing some of my boxes in “Projects”. I have received some inquiries about the installation of the barrel hinges I sometimes use. I hope this helps for some of you. I know it will be overkill for many of you, so just use what you wish. With any type hinge, the layout is critical. These hinges are simple to install, but you must get your holes in the right place. If you don’t, I can assure you , you will not like the results, and you will not be able to go back and...
After building the mock up, here is the parts list: Case:(2) sides – ¾” maple/plywood combo (46 ½ x 7 ½”)(1) top – ¾” plywood (13×7 ½”)(1) bottom – ¾” plywood (13×7 ½”)(1) shelf – ¾ plywood (13×5 ¼”)(1) back – ¼” plywood (46 ½ x 14 ½”) Ironing Board:(1) ironing board – ¾” MDF (42 ¼ x 12”) the last 13” are tapered down to a 4 1/2” circle (see pic below with cottage cheese container)(1) board support – ¾” MDF (12×11 ½”) rounded – see pic below(1) slid...
A couple of weeks ago I posted a project of a wedding ring box I made for my wife. It actually received quite a few comments about how I made the hinges…which I guess we are calling double action hinges. Since there was quite a few questions on how I made it, I decided that I should probably make a tutorial, considering I learn so much from tutorials on here. The box had hinges that were only about 4 cm, but for this I am doing larger ones so my camera picks up the steps better. ...
My mom is doing some amazing bead work. one time when I went with her to the beads store, I saw a small box/cabinet that the store used to store (no pun intended) the beads in, and thought it would make for a great way for my my to have all her beads organized – and I can make it. After completing my handtool box (at least the general construction of if) it made me think that I can scale it down and use the same ‘general design idea’ for the beads box. plus some additions...
One thing nice about not being allowed to use glue, No glue clean up and you can pre-finish all of the parts before assembly. On my finishing blog I wrote about using Pumice and Rottenstone as a wood filler, I thought I’d try something different on this cabinet. I used my private blend Danish Oil (1/3 Boiled Linseed Oil BLO, 1/3 varnish, and 1/3 Mineral Spirits). I squirted it on the boards and used a 120 grit Random Orbital Sander (ROS) to sand the oil and sanding dust. In doing that I wa...
The Roubo bookstand. It is one piece that truly fascinates me. Why? Perhaps it is the wooden hinge or the fact that the entire piece is made from one section of wood. The curves and the overall shape give it a look the outdoes anything with metal hardware. They are fun to make and a joy to look at. For this project I did not want to rush and make a mistake, so I am splitting it over two days. I picked out my last piece of mahogany and packed some tools and headed off. Now to make the Roubo...
I saw this design in a finewoodworking article, and really liked the design, and functionality of the piece, and decided to follow along. I did not use FWW plans, but created my own to fit my space, and needs, while keeping the general design, and concept of the FWW piece in mind. (I made mine, smaller, and shallower then FWW cabinet, also the interior is much different). This is basically a fingerjointed box that the doors are cut off from (to match grain) and hinged on a piano hinge. pre...
After seeing shipwright’s nifty wooden box hinge technique , I knew I had to try it myself. I’m not sure if it’s been attempted on this large a scale, but I’m happy with how it came out. The only change I made to the original technique was putting the grooves on the face of the board instead of the edge, that way the somewhat-unsightly filled groove would be hidden from view on the outside of the tool chest. Here is the initial setup with the grooves still open: ...
I awoke this morning to a dreary, cold, very foggy day. I don’t mind fog, my morning commute to work is only about 40 feet behind the house, and a little fog doesn’t slow me down much walking out there. Actually, it is mornings like this that I’m reminded how much I have to be thankful for. Back in the days when I had to commute by car 87 miles to Wichita, a foggy morning like this one was a real burden, even treacherous. I always write on the calendar when we have ...
Yesterday as planned I was able to trim the back panel, and fit the horizontal dividers and top panel so that it all fits together: Knowing the there are a lot of glue surfaces I didn’t want to take the chance of screwing it up (since I wanted to eliminate all metal fasteners …lol) so I did the glue up in stages. First was glueing up the drawer dividers to one another. I used the side of the box and the 2 rails to keep things aligned and in position while I only glued the d...
- My Journey As A Scroll Saw Pattern Designer - 1195 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- As The Lathe Turns - 67 parts
- Workshop Development - 66 parts
- Sheila Landry (scrollgirl) - 1217 entries
- frank - 417 entries
- degoose - 388 entries
- dbhost - 332 entries
- Ecocandle - 325 entries
- MsDebbieP - 301 entries
- Martin Sojka - 297 entries
- Karson - 294 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- mafe - 207 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- shipwright - 160 entries
- BritBoxmaker - 159 entries
- stefang - 145 entries