Hello ,during the school year i created and made a box joint jig work. The downfall being it used a deepthroated bar clams as its mirco adjust clamping the jig fence to my miter gauge. Now im bulding a tool box and need do to a finger jointed side , i have no clamps large enough and have seen no clamps large enough to accomdate in the same fashion , the panel is 11×14x1/2”. the 14 inch width is the one recieving 1/4” finger joints. Anyway im looking for any help or ideas on h...
I am currently working on a Jewlery Box and had some questions. I will be making the box out of Sapele with a bookmatched Birdseye Mapel panel for the top which will be held in a dado/groove. The bottom panel will be Sapele and secured the same way. The corners will be mitered with Wenge keys to help strengthen the joints. My question is should I glue in the bottom and top panels? The top and bottom panels for the box will be about 1/4 inch. I know that when making cabinet doors in the past I...
I have always wanted to make Finger/Box Joints on the table saw, But as it is only a little saw, I am unable to fit a Dado Set, or Multiple Blades. Along came LumberJocks. I was reading through the Projects everyone has posted, “Fantastic work” when if came across ADJUSTEBLE INDEX BOX JOINT JIG by Kiefer. http://lumberjocks.com/projects/100105 . Anyway I knew this was the jig to allow me to make my long wanted box Joints. I contacted Kiefer and he very kindly sent me some extra ...
Hello to all lumberjocks! As the title says, I am pretty new to woodworking. I have a lot of questions about techniques, tools, and ideas for projects. It seems as one question gets answered another one peaks my interest. Right now I am interested in getting and learning how to use hand tools for joinery, planing, and the like. I don’t have a planer or really any good hand tools yet (I borrow my grandfather’s tools, but even his are limited in the hand tool department). My firs...
Hi all! I am a young 16 year old guy that is starting to be interested in wood turning and also antler turning. currently i have shaped multiple antlers into different knives, but am looking for a good protective coating. I do not want to be able to use it as an everyday knife, but a ceremonial knife. I want to be able to have it be sharp but don’t want to harm the bone itself. Any Ideas would be greatly appreciated.
I decided that I wanted another workbench. I already have the wood workbench from HF that I picked up on sale for about 100 bucks a few years ago. That was a great purchase. But I have outgrown it and now need a larger one. Given that I’m in the military and will probably be moving in a few years I have been thinking about how I wanted to make the base. I came up with a simple, yet effective solution. Use my heavy duty storage racks. Later I might add cabinets, but for now, just t...
Hello all,Lately I have been thinking about making a cedar log cabin sauna for my cabin in the woods. I was thinking I could some how rig it up with a small wood stove. Anyone have any comments or suggestions to me about this? I am planning on squaring the logs so for it. My cabin is a scribe fit log cabin but I would rather not do that much work just for this sauna. Thanks!
Ok, so I know that finishing is an art all in itself. Finishing takes a lot of time and patience for beginners, but it seems that once you get it, you got it! I am struggling pretty badly with a Cherry Top entryway table that I am making my wife. The table started one Saturday as a ‘nothing special’ just needing a place to put a lamp type of project. My wife bought some curvy legs (the type with balls at the bottom of the feet) at Lowes one day because they were on clearanc...
I recently replaced the 5-HP motor on my Grizzly right-tilt table saw. (To be honest, my husband did because this weakling couldn’t lift 65 pounds.) I figured it was a good idea to replace the belts, too, so I ordered a set from Grizzly along with the motor. I’ve now gotten 3 sets of belts from Grizzly and none of them match my old, original belts. My original belts were FM-26. The first belts sent were 3V-250 which were the same configuration but too short. When I called b...
Hey folks, I just found out a better way to vote for me for the Nordy Rocklers Video contest “What inspires me to woodwork” her is the link and you can re-vote everyday until February 22, 2013. My Goal is to win first place, so I can finally get a Thickness Planer! Here is the link: http://woobox.com/5w2esk/upload/177869
- My Journey As A Scroll Saw Pattern Designer - 1371 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- Just for Fun... - 84 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1394 entries
- frank - 417 entries
- degoose - 393 entries
- dbhost - 389 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- mafe - 228 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 190 entries
- Rustic - 185 entries
- Chris Davis - 183 entries
- shipwright - 180 entries
- BritBoxmaker - 166 entries
- PurpLev - 163 entries
- stefang - 158 entries