111 days ago
by mreagleeyes |
18 comments »
I am working on yet another piece and thought I’d share me project so far with you guys.
The Magnolia ‘Salicifolia’ tree had stood in the grounds of the Inner Temple on London’s Thames for over 80 years but due to a fungus it had to come down.
My original plan was to use the timber as a practice piece that I could use my new Arbortech grinder on, however whilst the guys where cutting the tree down the girl in charge of the gardens asked what I would do with the t...
Read this entry »
175 days ago
by Talyn |
7 comments »
I did all my writing in the video check it out go to——> http://www.youtube.com/user/Cncdesignwork Click on (Heart End Table 0002)
Read this entry »
552 days ago
by Marcel T |
2 comments »
Hey guys! Taking advantage of the long weekend here in Canada, (so this was last weekend) I made a better base for my dremel. I was taking it apart to see why it was squeaking (trapped sawdust) when the idea hit me – drill the existing screw holes all the way through the body, and get a longer screw to hold the dremel together (like the old screws) and hold the dremel to the base. Well, I didn’t have a screw quite that long and thin, but I did have some short screws of the correct diameter. S...
Read this entry »
