LumberJocks

Woodworking blog entries tagged with 'hanging'

  • Advertise with us
View Mark A. DeCou's profile

Hanging Homemade Crown Molding: Suffering Through Mistakes & Learning Life's Lessons.

02-19-2007 06:29 PM by Mark A. DeCou | 11 comments »

I wanted to tell a little more about my experience with crafting my own crown molding, and share a couple of lessons I learned along the way. Previously, I showed how I formed and sanded the profile on the last blog of this topic, and so today I thought I would complete the task by showing the installation of the molding, and a few “gems” I discovered along the way. First off, I made very sure that my cabinet that I am hanging this crown molding on was as perfectly square on...

Read this entry »


View Mark A. DeCou's profile

Crown Molding: Crafting Your Own Trim

02-10-2007 08:43 PM by Mark A. DeCou | 10 comments »

My wife is gone for a few hours this Saturday morning, and the kids are busy watching a video, so I will update you on what I am working on now. I’m right in the middle of a “fun” project. It is “fun” on many levels, mostly because I have had to stop and scratch my head a lot. For those of you with kids, or remember having kids, or know someone who has kids, Winnie the Pooh always says, “Think, think, think” while poking his temple when he is try...

Read this entry »


View Smitty_Cabinetshop's profile

Wall Hung Tool Cabinet #2: What Comes from Old Hoosiers?

03-22-2012 08:58 PM by Smitty_Cabinetshop | 7 comments »

The first act was to deconstruct the old topper, as noted in Installment #1. But thinking the whole thing was made of oak was a mistake. Here are a couple of pics of side boards, post-glue-up to address splitting that had taken place over the years. This piece was totally abused (mostly in outbuildings) and has been separated from it’s base for decades: But for the tambour door slats, these sides are the only solid oak pieces of the cabinet. The major partitions as well as th...

Read this entry »


View Gary Fixler's profile

Wood Art #9: cute use for scrap wood - hanging block shelves

05-18-2010 06:42 AM by Gary Fixler | 7 comments »

Got a bunch of little wood scrap blocks, some planks, rope, and hooks? I found this online: More pics.

Read this entry »


View Dave Rutan's profile

Building the Spine Desk #5: Final Work and Assembly

02-17-2016 01:54 AM by Dave Rutan | 7 comments »

[Above] I used an actual bracket assembly to locate the holes in the spine segments. These allow a bolt to keep the tables from falling out from the spine. [Below] The larger table showing the rear cut out and the pine edging. I chamfered the bottom edge of both tables to give them a lighter, tray-like appearance. [Below] A few coats of spray lacquer is all that’s needed. I decided not to go to the trouble of staining this project. The birch plywood looks nice against the pi...

Read this entry »


View A_Train's profile

Simple Hanging Bookshelf

04-07-2008 07:18 AM by A_Train | 6 comments »

Well, here is my entry for the Bookcase Challenge. I actually completed this project a few weeks before reading about the competition, but thought this would be a great opportunity to learn SketchUp. My wife was looking for something that would allow her to have easy access to her reference materials while working at her desk. I came up with this simple bookcase. Simple Hanging Bookcase The overall dimensions of the bookcase are 30” wide by 25 1/8 “ high. The three shelves a...

Read this entry »


View Karson's profile

Summer Joinery Entry Shaker Cabinet #1: How I got started

07-28-2007 04:03 AM by Karson | 6 comments »

After Martin announced the Summer Contest and the Themes Garden Project and Wood Joinery I started thinking about what I wanted to build. The contest rules state “Wood Joinery – Let’s get technical – but without glues, metal nails, screws or other mechanical fasteners! Yes, this is the “WOOD JOINERY” challenge for all you LumberJocks out there. Let’s see what you are made of – or rather what your woodworking project is made of. If you can build it wit...

Read this entry »


View Karson's profile

Summer Joinery Entry Shaker Cabinet #4: Almost Done - Well really its done now,

07-28-2007 06:02 PM by Karson | 6 comments »

Almost Done> As I was reading the previous posted blogs on the construction of the Summer 2007 LumberJocks Joinery, I noticed that I failed to complete the posting of the latch for the cabinet door. Not only had I failed to post it, I had failed to install it. I wanted to use something like a clothes pin. The little loop that catches the wire for hanging clothes. I had created my wire simulation out of wood. This was installed in the end of a shelf board. The space behind the Holl...

Read this entry »


View andyboy's profile

Lamp table part 2.

03-03-2012 01:43 AM by andyboy | 6 comments »

Making and hanging the door using “chunky” butt hinges. Oh and the end credits are at the wrong end….yes I noticed that.

Read this entry »


View Dave Rutan's profile

Building the Spine Desk #1: Cutting and Gluing

02-03-2016 03:50 PM by Dave Rutan | 6 comments »

I’ve set out to build a desk that I saw online. In this case much of the work has been done for me because the website where the desk is sold actually lists the dimensions of the parts. That said, I’m making a few small changes. I’m not revealing my target until it’s done, so stick around to see where we end up. [Below] It’s just possible that this project could be made from a quarter sheet of plywood. I’m not sure yet, plus I’ve already violated ...

Read this entry »


1 2 next »
17 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com