Hi, I’ve seen these questions raised on several threads, and for many years didn’t know the answer to these myself. I just stumbled upon the “answers” which reminded me of the questions, so I figured I’d post it here for anyone that might be able to use it. I stumbled upon these on Lee-Valley website which is a golden fountain of knowledge if you know how to find it (some of their articles and tips are not visible, nor easy to come upon unless you stumble upon...
Well, got my first hand plane in the mail, the stanley 60 1/2 plane. It wasn’t in too bad of a shape, but definitely needed some work…. So, first step was to take it apart. Had to get out a couple punches and made one mistake which I’ll explain later… The smallest stainless steel parts weren’t in too bad of shape, pretty good actually, so all that they need was a soak and some hand scrubbing. They were put in a tub of simple green and I let them sit...
I saw this FWW Complete Illustrator Guide to Woodworking, and while I found most of the book to be mediocre (although a nice reference book when you’re starting woodworking) I did pick up a couple of cool ideas from it… then again, it might have been from a different book…lol so I finally mounted my (until now just laying there) hand planes in the cabinet. The shelves are shaped to the profile of each handplane for full support, the shelf has a small ‘step’ (1...
Hey LJ! Sorry to anyone who got the wrong video first time they viewed, I embeded the wrong video but that has now been rectified. I am by no means what you would call an experienced hand tool user and I tend to use them in conjunction with my powertools. Nevertheless following a hand tool project where I made some bookends which I did a few weeks ago… you can check that out by clicking on the link… Here! Anyway after that video I was asked about cutting dovetails so here...
THROW YOUR SANDPAPER AWAY!!! Ok, so don’t throw your sandpaper away, but cut down on the amount of dust in your shop by making this quick and easy tool. A card scraper is also very useful when working around knots in wood. In this video I show you how to take an old, out of service saw blade and turn it into something useful again. Thanks for viewing, comments welcome, and as always, please subscribe to my Youtube Channel.
Thanks to the likes of WayneC, Thos. Angle and Bob #2, I’ve been accumulating hand tools. One of the latest additions to the shop is a beautiful wooden plane. Made from Indonesian ebony and brass, it has an adjustable high-speed steel (Rc62-64) blade. I bought this plane for three reasons: 1. It was cool to look at.2. It didn’t cost much3. I thought my son could play with it and it could be his. Now, being a son of the metric system, I knew this plane was small. I just...
Mine was about 7 years ago, I still wasn’t doing anything woodworking like, and we had moved to a new apartment where the bathroom door wouldn’t close since it was too tall and would hit the jamb (well- actually we mounted one of those over-the-door-hanger thingies which made things that way) so, my wife suggested we get a handplane to fit the door to the (now lower) opening. I have never worked with a handplane before , and the closest thing I’ve ever held in my hand was...
I forgot to mention on the first part of this blog that I don’t have any pictures of construction on the bench. This was due partly to my camera crapping out on me and I really didn’t know this thing would turn out as good as it did. After completing the bench and seeing the results, I figured it would be a good idea to take pictures when I decided to do the table and share them with ya’ll. So, I bought a new camera. With that said I continue:Here’s what I used for a &...
The Roubo bookstand. It is one piece that truly fascinates me. Why? Perhaps it is the wooden hinge or the fact that the entire piece is made from one section of wood. The curves and the overall shape give it a look the outdoes anything with metal hardware. They are fun to make and a joy to look at. For this project I did not want to rush and make a mistake, so I am splitting it over two days. I picked out my last piece of mahogany and packed some tools and headed off. Now to make the Roubo...
“Maybe he was a pattern maker”. Alexander, my oldest son, is an engineer and was looking at the collection of gouge chisels as I put their tray back in the chest. I was wondering why Mr Wake had so many gouge chisels and whether that was a clue to his job. All the tools in this chest are marked “C Wake” but I know nothing else about him, except for what I can guess from the chest and its contents. “You just want to show off your collection of tools, that’s why you’re doing these arti...
- My Journey As A Scroll Saw Pattern Designer - 1189 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- As The Lathe Turns - 67 parts
- Workshop Development - 65 parts
- Sheila Landry (scrollgirl) - 1211 entries
- frank - 417 entries
- degoose - 388 entries
- dbhost - 331 entries
- Ecocandle - 325 entries
- MsDebbieP - 300 entries
- Martin Sojka - 297 entries
- Karson - 293 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- mafe - 206 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- shipwright - 160 entries
- BritBoxmaker - 159 entries
- stefang - 145 entries