Using up some scrap and creating something useful for the shop. A marking gauge is a great tool to have in any shop.
In my last Blog post about Bare Essential Woodworking I described the basic overview of rough cost to get into this hobby for a future woodworker on a Low Budget. Using those steps you should be off to a good start. If you have bought something to cut and cut with you are probably starting to feel like this. Credit to Nick Offerman and his inspirational wood shop. I am going to skip by the Idea/Plan phase of a project. The inspiration for that was well described in the last post but ...
My name is Robin Gosse, living in a (very) small town on the northern tip of the island-portion of the Canadian province of Newfoundland and Labrador. We are WAY out in the Atlantic ocean, farther East than New England region of the USA, well above 50 degrees of latitude. My wife and I recently bought a house with a huge garage, and I’ve begun the adventure of renovating it into a proper woodworking studio. Please visit my blog page and join in my adventure of home ownership, woodwor...
Pics will be on in a few min- will edit when I’ve got em all, hang in there ;) After making my small cherry smoother which worked great, I decided I wanted to up my game and build a more traditional styled plane. I also wanted it to be toted and have a harder wood for the sole of the plane. I chose to use cherry again because it’s what I had and it is very beautiful. For the sole I chose purpleheart- mostly because its what I had, but its also extremely hard and it is actua...
Create a shooting board that doesn’t cut just at one angle. Using some scrap wood and a couple of bolts you can create a shooting board that cuts multiple angles. Check out the video HERE! Sorry about the “scratchy effect”. Something happened while uploading and i can’t figure out how to fix it.
I’ve recently started playing with screen capturing and will be filming some of my sketchup sessions. I’m also in the learning phase of sketchup so any help, comments, suggestions are appreciated. Check out Part 1 here and then Part 2. As always, please subscribe for more great videos.
This workbench has came a long way. Started off by ripping down 2×8’s for the legs and the stretchers, then hand to mortise out the legs, create half blind dovetails and I’m finally at the top of the bench. In this video I show how I chose to mount the top of the bench so I can keep everything portable. I also cleaned out the shop a bit and placed the bench in its resting spot. Still lots of cleaning to do in the shop, but the bench is ready to go! Check out the video on YouT...
I have finally got the tenons cut. I went ahead and assembled the base. Click here for the video on YouTube.
I decided to make a card scraper out of a thinner material using a handsaw from a yard sale for $1. I can tell a big difference in the flex from the handsaw blade and the table saw blade. I’ll be using both for a bit and seeing which one I like better. Click here for the video on YouTube. And please subscribe. Edit: I can’t embed video on here at the moment, I will keep trying.
THROW YOUR SANDPAPER AWAY!!! Ok, so don’t throw your sandpaper away, but cut down on the amount of dust in your shop by making this quick and easy tool. A card scraper is also very useful when working around knots in wood. In this video I show you how to take an old, out of service saw blade and turn it into something useful again. Thanks for viewing, comments welcome, and as always, please subscribe to my Youtube Channel.
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 107 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 420 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 246 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 214 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 194 entries
- A Slice of Wood Workshop - 190 entries