Sharpening chisels—forget weaker micro bevels Controversial though it may seem, and though adopting micro-bevel methods for sharpening chisels may seem to make sense, a freehand convex bevel actually gives exactly the same sharpness as any micro-bevel method, but takes only a fraction of the time to develop. A convex bevel keeps its edge longer, is stronger than most other bevels and needs no special equipment beyond a pair of hands. Establishing the skill to sharpen the convex camber ...
STANLEY BENCH PLANE RESTORATION Click here for large format version PDF ELECTROLYTIC RUST REMOVAL INSTRUCTION SHEET More information available on my woodworking blog & podcast The Folding Rule Show Step #1 – Cleaning & Rust Removal I have been inspired by a number of resources to start using my hand planes and start on the slippery slope of a hand plane collection. Not the least of whom has been Wayne, our own Lumberjocks plane guru. Of course I have also explored...
I decided to sharpen the firewood/ pallet blade today. It was cutting pretty slow. Thank goodness it is a combination blade without too many teeth. While I was filing, the first time I have tried this by the way :-)), I thought I should have put the blade on backwards and jointed it with a file. Has anyone ever done this? 20 minutes after fininshing the filing, I hit a nail!! Murphy’s law, I thought about that before I filed, but it did cut very well and I could defiinitely tell ...
I keep seeing these posts pop up more often than not about the scribed line for dovetails, should you leave them on? should you scrap/sand them off? Some say it tells the joint was hand made, Others rightfully so say that the piece itself tells that it was hand made…. Should you make them with a scriber? Or a pencil? A pencil line is easier to remove, but harder to line up to as you are relying on eye sight, Whereas a scribed line with a knife is a no brainer since you just rest your...
I always wanted to try electrolysis rust removal and it is just as simple and effective as they claim. Note: This is not a full tutorial on electrolysis. You must research the many other resources on the internet before attempting this your self. IT CAN BE DEADLY AND ILLEGAL IF DONE WRONG. This is the old Stanley No. 62 low angle jack plane that needed to be de-rusted: Here it is in pieces: And here are a couple “before” photos of the body: Here̵...
UPDATE 5-2-2008: You can see the finished cane in this project posting: - – - – - – - – - – - – - – - – - – - – - – - – - – - – - -—- – - – -—- – - – - Back to my original Blog: This is a short blog, as I sort of spilled my insides out earlier this week with the previous blog. So, not much to say tonight. I’m working on a unique commissioned walking c...
So there I was last night. Down in the shop putting the finishing touches on a piece of cherry that would become a part of the desk I’ve been making for my daughter Madison. The pieces are all cut and dimensioned so now I’m just using my smoothing planes to put that sheen on the face that only a sharp blade can achieve. I have nothing against sanding, but I promised myself a long time ago to keep on practicing when and where I can with the hand planes. I’ve come a long w...
Stanley Bench Plane Restoration UPDATE PDF ELECTROLYTIC RUST REMOVAL INSTRUCTION SHEET I have been a bit frustrated, as I can’t use my shop until the outside portion of our house reconstruction is complete which should be very soon. I have been using the down time to restore my Stanley bench plane. As soon as I get back in the shop, I have plans to make a video tool review so I am quite anxious to get going! My Stanley Bench Plane restoration project is near completion. As a remi...
Stanley Bench Plane Restoration UPDATE PDF ELECTROLYTIC RUST REMOVAL INSTRUCTION SHEET My Stanley Bench Plane restoration project is progressing well. All parts have been cleaned of rust using the electrolytic rust removal process described in the prior blog entry. I was really impressed with how clean the parts were after the electrolytic de-rusting process. As a reminder, this is NOT a plane with intrinsic collector value. I am restoring this “user plane” to be used on my bench...
Thanks to the likes of WayneC, Thos. Angle and Bob #2, I’ve been accumulating hand tools. One of the latest additions to the shop is a beautiful wooden plane. Made from Indonesian ebony and brass, it has an adjustable high-speed steel (Rc62-64) blade. I bought this plane for three reasons: 1. It was cool to look at.2. It didn’t cost much3. I thought my son could play with it and it could be his. Now, being a son of the metric system, I knew this plane was small. I just...
- My Journey As A Creative Designer - Woodworking and Beyond - 1793 parts
- Extremely Average - 324 parts
- Toy costruction - 116 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Woodworking on a Half-Shoestring - 82 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1818 entries
- dbhost - 436 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 313 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 242 entries
- Dave Rutan - 231 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- A Slice of Wood Workshop - 211 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 195 entries