I’ve been searching for a #7 for a while now. I finally stumbled onto one in and antique shop that was within my acceptable price range. My wife and I was riding the bike through southern Vermont and stopped at this small shop. I wound up walking away with a nice #3 and a #7. How great is it to combine two pleasurable pass-times in one afternoon. The nice thing about woodworking as a hobby, is you can work as inspiration strikes. Yesterday I was working on the drawers for my new (wel...
I don’t have any “before” pictures of this one. It was in pretty rough shape, but cleaned up pretty easy. It works pretty well and I find myself reaching for it more than I anticipated. Someday I’d like to pick up the A4 and A6 as well, but they are a bit pricey and I have several #4’s and #6’s. It seems Patrick Leach didn’t seem to care for these aluminum versions, but this one stays in my collection.
So, I wanted a #6 but didn’t want to spend much on it. I bid $15 on this Millers Falls on ebay. My thought was to use it until I found a Stanley #6 and resell it, hopefully for a profit from the restore. Well you probably already know I found an even cheaper Stanley #6, but I’ve had this Millers Falls 18 for a while now. I love this plane. The #6 is to new to know how it compares, but this Millers Falls has found a place in my collection. It just seems to hang very nicely. So f...
I found this Stanley #6 in a flee market. I paid a whopping $10 for it. This is my first restore blog, but not my first plane restore. I’ve learned a little, and need to learn a lot more. So here it was: I haven’t totally figured out my way of doing all of this, so sometimes I try several different ways. To flatten the sole, I start with sandpaper on my table saw top. If it looks like its going to take a lot, I move to the Ryobi sander, then back to finish on the ta...
Went shopping again today and have found many things. I found 2 fore planes, molding planes, grooving planes, rabbit plane and a folding ruler. My tool restoration skills are fixing to be sharpenedhey Dennis I need to borrow your gutterHey Mike do you think I will have time to catch up on the bucket My lovely wife allowed me to spend $150.00 bucks today. She came back with a pig piggy bank. And our daughters go prom dresses.I think I got the better deal.
I just posted some pictures of my buddy’s Hand Tool Chest. If you like hand tools at all it’s worth checking out. http://www.craftedbytim.com/?p=203
I took my wife to First Monday Trade Days in Canton, TX. For those of you that do not know, the entire town of Canton, TX becomes a huge flea market on the weekend prior to the first Monday of each month. There you can find lots of planes, but there are two booths that are of particular interest. Those booths have the motherlode of hand planes and other tools. First up a 19th century workbench from Hammacher Schlemmer & Co. Have any of you ever seen an ALUMINUM No. 45? ...
OK, so Mary Anne posted some blog entries on making whistles. I decided to make one using only hand tools. Here's a link back to Mary Anne's post. So, we start with some rough lumber. In this case a piece of wacky cherry. The board has lots of pitch inclusions, crazy grain and cupped something awful. But it will be fine for a whistle. By the way, no rulers were harmed (or used) in the making of this project. All measuring done by the Mark-I eyeball. 1) Cross cut a blank. Eye...
I think I need help. It’s happening. I cannot stop researching planes and workbenches lately. I don’t have room for a bench, nor money for any planes, but they’re just so enticing! Lie-Nielsen has been the most attractive by far, but I find it staggering the number of planes available – 44 standards listed, with an additional 30 variants, not including left/right hand options for the few that have them (same price in each case). The bench plane model numbers (e.g. N...
Here I am, finally on Lumberjocks! I thought I would introduce myself by sharing a video of me working on my current project, a Shaker style six drawer dresser in walnut. This is becoming my typical style of woodworking over the last year. I mill lumber in the barn with a jointer, a planer and a table saw and then move to the Cottage Workshop where I slow things down, using hand tools and traditional techniques to join parts together. This ia also my first time-lapse video made with the Gawke...
- My Journey As A Scroll Saw Pattern Designer - 1197 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- As The Lathe Turns - 67 parts
- Workshop Development - 66 parts
- Sheila Landry (scrollgirl) - 1219 entries
- frank - 417 entries
- degoose - 388 entries
- dbhost - 332 entries
- Ecocandle - 325 entries
- MsDebbieP - 301 entries
- Martin Sojka - 297 entries
- Karson - 294 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- mafe - 208 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- shipwright - 160 entries
- BritBoxmaker - 159 entries
- stefang - 145 entries