LumberJocks

Woodworking blog entries tagged with 'hand plane'

  • Advertise with us
View Paul Bucalo's profile

Woodworking on a Half-Shoestring #78: Resurrecting a Coffin Smoother - Part II

09-30-2016 03:10 PM by Paul Bucalo | 0 comments »

The glued fractures appear to be holding up well. Since the fractures weren’t smooth and the sole wasn’t flat—with major gouges between the mouth and toe—I decided to take some course grit to the outside and flatten the sole. The sole is flat and the gouges are gone. Progressing through the grits should make this look, feel and work better once finished. The wedge is shot. A replacement will have to be made. The trouble area is really betwee...

Read this entry »


View YusukeKomiya's profile

My First Stanley Hand Plane (#3 Type 13)

07-29-2016 01:41 AM by YusukeKomiya | 1 comment »

I paid about $60 for this beauty on Ebay. I was looking around for some cheapo rusty plane but when I saw this one I knew I wanted it. The knob and tote are in great condition. There is little rust and pitting. Most of the japanning is still intact. I still plan to clean it up to make it more pretty. I can’t wait to finally have square stock (which has been the bane of my past woodworking experience growing up before I knew better XP). I was about to buy a planing machine until my broth...

Read this entry »


View Lemongrasspicker's profile

Butterfly Spline inlay on a Kanna Dai

02-19-2018 03:24 PM by Lemongrasspicker | 1 comment »

This is a repair that is often done when a Kanna has a split or check in the wood. Rather than simply filling it with epoxy and/or superglue, it is way better to use a mechanical connection to repair the crack and ensure that it doesn’t expand or get worse in the following years. View on YouTube The key for these (literally) is to make the spline as strong as possible, and to ensure that it stays put, it does need to be glued in place. The maker of this dai is a gentleman named J...

Read this entry »


View LastingBuild's profile

How to dimension lumber with handtools #1: Tools

09-10-2018 01:38 AM by LastingBuild | 0 comments »

I started a new video series tonight on how to dimension lumber using only hand tools. I am currently woking on building a treadle lathe and have been busy dimensioning all the components for the project. The tools I am currently using are the Stanley Sweetheart #4, Stanley #62 low angle jack plane, Stanley Bailey #7, A square, Stanley marking knife, Wood river marking gauge and 3 foot long measuring stick. It is a little slow but a good work-out. My shaving pile his about a foot tall now. ...

Read this entry »


View LastingBuild's profile

How to dimension lumber with handtools #3: Reference Edge

09-13-2018 01:48 PM by LastingBuild | 0 comments »

Now that the reference face is established we move on to the reference edge. I first visualize the low and high spots and using my jack plane begin to bring down the high spots to meet the low spots. Once the edge is fairly flat, I check for flatness using my reference. Once flat, I turn my attention to assuring I have a 90 degree edge. Using a combination of the jack plane, jointers plane and smoothing plane I fine tune the edge until it is flat and square to the reference face. I mark the e...

Read this entry »


« prev 1 ... 15 16 17 18
175 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com