NOTE: I edit this and add sites from time to time. Also note I am not associated with most of these in any way. Also, just because its listed, It is NOT a referral, some I’ve used, some I have not. Use it as if you found it on your own. Please take a look at my blogsPlane Restoration How to Tips for Setting up a bench planeAnd many more General:The mother of all Stanley information http://www.supertool.com/StanleyBG/stan0a.htmlhttp://www.cs.cmu.edu/~alf/en/antique-tool-faq.txt ...
There are many good blogs, articles and web pages out there that give you all you need to know about restoring old hand planes. Most of what I learned I got from other peoples advice. Even though there are many resources out there for restoring planes I found myself learning new tips and tricks from each and every one of them. I decided to do a series of blogs on my methods for restoring planes. Most of what I discuss you may all ready know from reading other blogs and sites but hopefully I c...
Hand plane fence DIY (for my no 3 and 4) BlogMaking your own fence for any metal handplane. I decided to take up the challenge of making a fence for my hand planes, this time I made one that will fit my no. 3 and no 4 Stanley and Record planes.The next one I build will be for the larger no. 6 and 7, but you can follow this DIY for every size. You need:Hardwood or plywood in a good quality.(A) 6mm thick; app. 20 cm (8 inch) by 15 cm / 6 inches (B) 6mm thick; app. 20 cm (8 inch) by 10 cm ...
Hand plane DIY convex.Or Mike meets Mads style… Our dear Mike (Stefang), started a ‘master class here on LJ, a blog on how to make a traditional Nordic bucket, and part of this class was ‘making a convex hand plane’, so this was why I did it. Thank you Mike!Also it was a dream for me, a dream to make my own hand plane, not that I needed one, but to prove to myself I could, and in the future be able to make special purpose planes when needed. Since I’m a bad...
I have been fortunate enough to assemble and use an array of handplanes – Stanley Bailey bench, block, and specific use planes, oriental woodies of various sizes, Lee Valley Veritas bevel up and scraper planes, and some other assorted types. It took a while, as in 4-5 years of using, fettling, trying various methods of things and different plane designs to form up some conclusions from my experiences. I thought I would pass along these experiences, primarily with the lesser experienced in min...
Intro- I’ve been using a lot of wooden planes recently and have really come to enjoy their lightness and the feel of wood sliding on wood. Obviously there are a ton of vintage woodies out there; however, I quite enjoy making my own versions of them. They are a lot cheaper (if you have some time on your hands) and you don’t have to deal with old warped wood and a host of other problems you may encounter. I can’t say I am an expert by any means, I’m simply sharing my...
MaFe style Kanna jointerJapan meets Krenov For quite some time now I have had three wishes that I wanted to fulfill in one project.1. To have a Japanese Naga-Dai-Kanna (jointer plane).2. To combine the Krenov plane building style with Japanese planes.3. To find use of a beautiful old hand forged Japanese plane iron that I had purchased some time back. Here an example of a Japanese jointer plane I saw on E-bay. On this link a seller in Germany, I think the price tag huts a wee bit: http:...
Collecting this information from a variety of web resources. Please watch the type of thread as well. Record Here are the sizes from Recordcollector’s site: Cap Iron screw : 5/16” 18tpi BSW (I believe this is the only standard BSW thread on bench planes)Frog screws : 7/32” 20tpi Whitworth;Tote & Knob bolts : 7/32” 20tpi Whitworth;Tote Toe screw : 7/32” 20tpi Whitworth;Frog Adjusting Plate screw : 7/32” 24tpi Whitworth;Frog Adjusting screw : 1/...
In the last shop update, I briefly mentioned a grooving plane that did not work so well. The idea was to have a tool that could quickly make the grooves in the bottom of draw and box stock to accept the drawer/box bottom. The new design really rocks, so much that I made three sizes (widths): 1/8”, 3/16”, 1/4”. Although these are intended for making the grooves on drawer and box sides, I have been discovering more uses for the flexible design of these planes: Shop Jou...
Hand plane DIY convex.Or Mike meets Mads style… SECOND PART.Press here for first part. To remind you, this is what we are after. A hand plane, ‘block plane’ size, made for a rounding of 22 cm (app. 4 inch).As you can see Krenov style, and a touch of Japan, at least this was my wish… Time to make the wedge.I wanted the same wood as the plane, and had an old floorboard, that could be used.Cleaned it up, and cut it to same size as the plane iron, so I have a little slip in the ...
- My Journey As A Creative Designer - Woodworking and Beyond - 1808 parts
- Extremely Average - 324 parts
- Toy costruction - 129 parts
- A journey into the workshop. - 114 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Woodworking on a Half-Shoestring - 91 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1833 entries
- dbhost - 441 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- mafe - 321 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 245 entries
- Dave Rutan - 245 entries
- Betsy - 228 entries
- stefang - 221 entries
- A Slice of Wood Workshop - 214 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- bandit571 - 201 entries