Hello all. I am a new member to Lumberjocks, but have been reading the blogs and reviews as a guest for a number of months. I really enjoy how members share their various experiences, so I wanted to contribute mine. I am in the tool buying stage, working towards becoming a novice woodworker. As such, I am constantly searching craigslist and reading woodworking forums. I came across this ad on craigslist for a new in crate Hammer A3 31 jointer/planner – $1500. With such a low p...
The A3 31 is shipped on a wood platform attached to two steel bar channels. This in turn is bolted to a wood pallet. I elected to leave the unit on the platform and pallet for now. I’ll have to figure out how to get it down at a later date.There were bits of disintegrated plastic all over the interior of the box, along with lots of dead bugs and spiders. The rust damage is fairly extensive on the jointer beds. The far end of the bed is where the person selling the unit tr...
I decided to begin work on removing the rust on a small section of the outfeed table. The surface of the jointer beds are made up of machined “ridges”. I first tried multiple applications of Boeshield Rust-Off. Even though the garage door was open, the fumes were terrible. (I added a fan blowing across the table and that greatly improved things.) I first rubbed off the surface rust with a blue scotch-brite pad. I then sprayed on the Rust-Off, wait 1 minute, then abraded with...
Anybody who has studied Chinese woodworking will not doubt have come across prints like this one where a ancient Chinese woodworker is depicted pounding on a piece of furniture with what appears to be the blunt edge of an axe. For example the Lu Ban Jing, a woodworkers manual written around in the 15th century, shows a woodworker assembling a table by pounding on one of its legs with the blunt side of an axe. During much of China’s long and colorful history, China has been more or le...
I’ve started on my new solar kiln. The plans are from Virginia Tech’s solar kiln project. I’m using the modified plans for a 2000 bft kiln. The framing is 2X4 white pine, floors are made from 1” white oak, the outside siding is 1” white pine with 1” poplar over the pine. After the insulation is installed the inside will be covered with plywood. The supports are made from log sections of black locust. I’ll have more photos when it’s f...
I am fortunate to have a hammer that belonged to my Grandfather and one that belonged to my Dad. Hammers generally are pretty generic items but there are a couple of aspects about each that I like and are not seen in todays’ assortment of hammers available at the hardware stores. My Grandfather’s hammer is one that fortunately I had long before Chris Schwarz dubbed it as his “favorite hammer” and made its price jump up. It is an old Belknap Blue Grass rip hammer a...
I decided to try my hand today at cleaning my great-grandfather Herbie's tools that my dad donated to the shop around Halloween. As you can see they’re pretty rusted and well used. The hammer is clearly missing a handle and the two chisels definitely need new handles (one is broken off in the cone, the other has it’s handle but that thing is so dry rotted it hardly weighs anything). After some research on the internet I found a couple home-remedy ideas (I don’t have t...
Hello, My name is Jeremy (firm cyber hand shake). This is my first blog entry for my account here at LumberJocks. Short intro. Please excuse my spelling. Spelling has been a struggle for me my whole life.A bit about my self. I was born in Marburg Germany, but have lived the larger part of my life on the west coast of the USA. I love anything I can do with my hands. Pottery, glass work, automotive work, carpentry, cooking, brewing beer… you get the idea. I love to learn and share. I a...
Just before we left on our trip, my parents came up from Florida to visit in the last week in October. With them, besides lots of laughs and smiles and good times with the grandkids, they brought me some of my Dad’s tools that had been collecting dust down in the sunshine state. He decided that since he wasn’t really doing anything with them, he’d rather see them in my shop making sawdust rather than collecting dust. Who am I to argue with the wisdom of my father? Espe...
Sweet little MsDebbie – (Hammer)re-handle and then again… It sounds like an old classic ‘Sweet little MsDebbie’, and in a way it is. Few days ago I was having an off day, so as so often I looked at LJ and ended in the midst of an argument there, so I followed the old lesson to count to a million or so before you reply (some people can learn from this, I’m one). So off to the workshop, since I was not so fine I needed a small thing, something that could be done quick and cle...
- My Journey As A Scroll Saw Pattern Designer - 1463 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 93 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1487 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- mafe - 236 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- shipwright - 198 entries
- Todd A. Clippinger - 197 entries
- Rustic - 186 entries
- stefang - 185 entries
- Chris Davis - 183 entries
- BritBoxmaker - 177 entries
- PurpLev - 163 entries