Hi Guys, Today I wanted to present you with the simplified version of a Gripper I made earlier I used plexiglass for the frame because it is strong, light and less bulky than plywood The rest of the Gripper is made of Baltic birch plywood I used the sticky anti-skid strips for the legs (homedepot)And made a simple eccentric wheel to act as a balancing plate on the original grr-ripper You can see the details and dimensions in this 3.5 min video: https://www.youtube.com/watch?v=D...
Hello colleagues, So, I used my pusher for some time and it worked fine in 95% of the cases and then I decided to match all of the features of the Grr-ripper Deluxe that sells for about $120…:) In this video I’m adding: a 1/8” leg from plexiglass, stabilizing plate/balance support, routing spacer and a “heel” for resawing and veneer cuts to match all Grr-ripper Deluxe model’s capabilities. https://www.youtube.com/watch?v=e7Ow9GhgB_o
Hello colleagues, I was flattered with the responses to my posted project Super-Gripper shopmade pusher (it went to TOP 3). So, figured I would elaborate a little on this jig. It is an awesome pusher for the repetitive cuts, especially on the very narrow planks. It makes the task safe, easy and easily repeatable . It also significantly cuts back on the fine dust that flies to you face during the ripping operation, especially if you have a dust collector hooked up to the saw (the lower cham...
https://www.youtube.com/watch?v=PXDdAhpPCok I built these toy chests for my Nieces (they aren’t technically my nieces but I consider them family!), we’ve been talking about it with them and their parents for a couple years now, and one of the twins is particularly interested in my woodworking shop. They always have to look for our cat who is scared of everyone and hides out whenever someone knocks on the door, but usually the cat is hiding out in the shop, and the curious kids...
Just thought I’d share the love over here! I’m running a giveaway for a GRR-RIPPER GR100. The giveaway is restricted to US and Canada. You can enter on my blog at http://wp.me/p4ME6k-lV or on my facebook page at http://is.gd/L8Nw8n Good luck y’all!
:O) I am a bit excited. I finally have a set of GRR-Rippers in the shop. I have been wanting one for a long time. So I put together this video to show you just a couple reasons why I am pumped up about these helpful shop accessories. Not only are they keeping me safe, but they are allowing me the opportunity to perform tasks I couldn’t perform before… That in itself has got me doing backflips… lol Here is a look at the video
In my quest to outfit my shop, I’ve spent quite a bit already on the major tools, so I’m trying to make my own jigs and do my own upgrades as I can. With the types of small wood projects I’m interested in doing, I really need a way to cut small dimensions. I do have an old Black&Decker table top bandsaw, that has definitely seen better days, but other than the tablesaw, no really efficient way to get 1/8”, 1/4” and 1/2” stock other than plywood, which I...
- My Journey As A Creative Designer - Woodworking and Beyond - 1813 parts
- Extremely Average - 324 parts
- Toy costruction - 130 parts
- A journey into the workshop. - 115 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Woodworking on a Half-Shoestring - 91 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 82 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1838 entries
- dbhost - 448 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- mafe - 322 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- Dave Rutan - 265 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 253 entries
- Betsy - 228 entries
- A Slice of Wood Workshop - 221 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- bandit571 - 210 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries