LumberJocks

Woodworking blog entries tagged with 'grinder'

  • Advertise with us
View bobasaurus's profile

Sharpening Bench #1: Building a Sharpening Bench

10-21-2012 04:22 AM by bobasaurus | 3 comments »

Well, it’s been a disheartening day. My lifelong family friend and mentor in both woodworking and science recently died, and his funeral was held this morning. He ended up taking his own life, completely out of the blue without any warning or reasons that could be seen. Recovering from the shock has involved a lot of appreciation for the things I love in life, including woodworking. Thus, I’ve been spending a lot of time in the shop on this project and thought I would take the...

Read this entry »


View Dutchy's profile

Robert Sorby ProEdge look alike

03-23-2016 09:29 PM by Dutchy | 13 comments »

A couple of years ago I bought my lathe. From time to time I use him as a lathe (mostly he is used as a disksander) and in particular for cylinders. For making the cylinders I use TC tools with changeable knives. I also have a couple of HSS turning tools. Till now I could not sharpen them as I would like. I like the Robert Sorby ProEdge, but with a price of more than Euro 600 too expensive for me. So last week I decided to give it a try to build my own and for me it was successful. Started...

Read this entry »


View wolflrv's profile

Shop Improvements #6: Bench Grinder Toolrest

12-12-2011 11:00 PM by wolflrv | 5 comments »

Made this little grinder toolrest to sharpen my lathe tools. I’ll probably still build the wolverine type jig too, but needed this first. Also included in this post are a couple of shots of the set of lathe tools and draw knife, I got for $10 at a garage sale, as well as my new mini set. I know I’ll probably need other stuff, but figure this will get me started. Most of the lathe stuff I plan to do will be part of building more model cars and toys, so it’ll be mostly small p...

Read this entry »


View PurpLev's profile

Work(shop) in Progress #17: Sharpening Station

10-28-2011 09:04 PM by PurpLev | 4 comments »

When I started working with bladed tools (chisels/planes/etc) I wanted a sharpening system that was on the cheap, small and storable and versatile. I chose to start with the scary sharp, and used sand papers from 100grit (rough shaping and cleaning nicked blades) to 2500 for final honing and green compound for touch ups. I added the Veritas MK-II honing guide and was using it for reshaping/resestting blades and honing them through the grits. While this method worked for the time I wanted s...

Read this entry »


View bearkatwood's profile

Shop Remodel #8: It's Monday, Back to the Ole Grind.

12-01-2015 12:41 AM by bearkatwood | 14 comments »

It’s Monday and it’s back to the ole grind I go. This is another blog in my ongoing series to remodel my shop and make a saw till, drill press cabinet, tool cabinet, plane till and workbench. I have been woodworking for 16+ years and have always done my work in dark, dusty caves on anything that would resemble a bench. I have finally decided to spoil myself and go hog wild doing it. I wanted to bring you all along as I made these pieces as it will be a very epic build. I have ...

Read this entry »


View Sanderguy777's profile

File Chisel Build #1: Part 1: The shaping and grinding

06-20-2015 08:03 PM by Sanderguy777 | 0 comments »

This is my first try at this blog thing so any advice is welcome. I’m sorry for the lack of pics but I thought of posting this after I cut the file. Anyway, I needed a wide chisel and I had a file that was oversized so I chopped it up and started grinding away…. This is the part that I will use on this project. After I had cut it, I thought that I should have measured so that the finished product would span a 2×4. So if you do this, remember to measure…. This i...

Read this entry »


View David Craig's profile

Making your own parting tool

05-18-2010 02:14 PM by David Craig | 12 comments »

Been awhile since I have had any quality time in the shop, so I decided to invest some vacation time and I will be taking a week off next week, with the emphasis being on shop time. So I have been getting my ducks in a row so I can have a somewhat productive week. Last week involved a little wood gathering (that deserves a whole ‘nother post…), I have my sharpening system and chisels arriving today, and I have been scouring books and mags to try to come up with some projects. Sinc...

Read this entry »


View Tim & Candy Hicks's profile

Twisted Coffee Table Base #3: Juniper Table Base Leveled & Shaped

02-10-2009 11:08 PM by Tim & Candy Hicks | 4 comments »

Well, we are making some progress on the two coffee tables that we are working on. This is after it has been leveled, the levelers/slides have been added and all the rough edges have been rounded and shaped. Today my husband is sandblasting then tomorrow we should start the final and longest phase… sanding and polishing This is the part that we cringe and hope we stay in line… dont want to end up with an extra short coffee table Whew… right on line and ready to f...

Read this entry »


View joez's profile

scansgrind

10-18-2010 05:32 PM by joez | 2 comments »

Anybody know anythings about the scansgrind/ scansslib?

Read this entry »


View Sawdustonmyshoulder's profile

Delta 46-715 Lathe Refurbish Project #2: Tach, Toilet and Grinder

01-02-2015 12:46 AM by Sawdustonmyshoulder | 3 comments »

The tachometer came in yesterday. Now, I’m ready to start working on determining the pulley sizes. I did read, understand and follow all the instructions that came with the my tachometer. After putting the refective sticker on the flywheel of the motor, I was able to determine that the maximum speed of the motor is 6200 RPM’s. That speed is about twice as fast as I need it so my pulley ratio should be around 1:2. I found a pulley calculator online and I have an idea of the size...

Read this entry »


1 2 3 next »
26 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com