This is my first carving of a Green Man. This is carved from the pattern that is in the book, Relief Carving Wood Spirits: A Step-By-Step Guide for Releasing Faces in Wood by Lora S. Irish. She is one of my favorite woodcarvers and artists. She has inspired me a lot. I attempted this carving about 8 months ago and shortly after I started I realized that I didn’t have enough skill nor did I know enough to complete it. I didn’t get to first base and quit shortly after I started it. ...
This green man is from a pattern by the famous artist and woodcarver, Lora S Irish. The pattern is in her book, Relief Carving Wood Spirits: A Step-By-Step Guide for Releasing Faces in Wood . I love this book and Lora Irish has inspired me. After carving this pattern in my last blog entry I decided that I wanted to do a second version of the carving, only larger and deeper. As on the first carving, I transferred the pattern to the blank and cut the pattern on the scroll saw. The picture be...
Last coat of linseed oil is dry, all set to ship it out to the UK!
Cheekcorns and twigs are done, leaf mustache and mouth area are in the works…...
shaped the acorns a bit more, and have come to agree with some others that they need to be shorter. I also figured out they need to set further down in the carving, the indent in the caps are supposed to fit under the edge of the leaves! Then I went back to the lower facial leaves and worked more depth and detail there…..
More progress on the Man, chin area is beginning to take shape, More work on the top of the head…..
started working on the acorns, but something feels off even though my calipers and measurements from the drawing tell me all is correct, and I have some room for error on the nuts. So, I worked around them and will come back to them in a few days with fresh eyes and see if I can find the solution. If anyone sees something I don’t, let me know!
Monogrammed, sanded, and 50/50 turp and linseed oil applied, one coat of full strength to go!
This is a new piece I will be working on over the next 3 or 4 months. It is 5”x7”x3.20”, a small carving for me, the wood is Alaskan Yellow Cedar. All in all this will be an unusual project. I will be on a trip to Florida next week to visit my dad, and when I get back I will begin a full fledged commission work for a client/friend, a bust of her Swiss mountain dog! I will spend an hour or two on most days after the commission piece working on this Green man for The Sawcliffe...
Further progress. Details on the twigs and buds are much easier to do with my new Helvie knife, I am really beginning to love the tool. I will be concentrating on my other project for a few days to get it established, then I will start splitting my days between the two.
- My Journey As A Creative Designer - Woodworking and Beyond - 1780 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Toy costruction - 104 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- Sheila Landry (scrollgirl) - 1805 entries
- dbhost - 432 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 307 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 233 entries
- Betsy - 228 entries
- Dave Rutan - 221 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- A Slice of Wood Workshop - 203 entries
- Smitty_Cabinetshop - 195 entries