LumberJocks

Woodworking blog entries tagged with 'gramercy'

  • Advertise with us
View HokieKen's profile

Bow Saw Build #2: Cuttin' and Fittin'

08-25-2017 12:42 PM by HokieKen | 6 comments »

I did most of this before I started taking pictures so the pics are a little sparse. But, I think the process is fairly easy to follow. First thing I did was to make my two 5/8×1/4 mortises in the vertical frame pieces. I hogged the bulk out on the drill press then cleaned them up with a chisel. The mortises are 3/8” deep… (this will be important later!) On a side note, I’ve been using the hell out of my Gramercy holdfasts on my new bench. I don’t know h...

Read this entry »


View HokieKen's profile

Bow Saw Build #1: Getting Started

08-24-2017 11:57 AM by HokieKen | 13 comments »

Well, my buddy Bill (builtinbkyn) recently made a couple of turning saws and I knew I had to have one. So when my Mom asked me what I wanted for my birthday earlier this month, I told her I’d like one of the Gramercy bow saw kits from Tools for Working Wood. For $29 you get 3 blades and the brass pins needed. You can buy various other parts as well but, where’s the fun in that? ;-) So, I started with that and off I go… First I chose my woods and milled my blanks...

Read this entry »


View Lazy_K's profile

Gramercy tools bow saw kit / new tool, christmas present

02-13-2014 07:19 PM by Lazy_K | 4 comments »

Hi! the first project I’d like to share with all yall this year is this bow saw I made. I was given a bow saw kit from Gramercy tools. Knobs, brass blade holders, 3 – 12 ” saw blades. They have the plans for free on their website…. however, like many of us, I can’t just go with someone else’s standard or ordinary set up. So I did a google search for bowsaw, and selected “IMAGES FOR *” and got thousands (well maybe only a hundred or so) of...

Read this entry »


View doorslammer's profile

Building the Gramercy Carcass Saw Kit #1: The Build

12-05-2011 04:03 AM by doorslammer | 5 comments »

I recently purchased the Gramercy Carcass saw kit to add a nice crosscut saw to my till and if Chris Schwarz and Roy Underhill prefer it I thought I’d give it a try, but at $200 it’s a bit pricey. The kit however is a little more than half that and all that’s left to do is attach the brass spine and shape a handle. The kit comes with the saw plate sharp and ready to go, a bent brass back, a pair of split nut saw bolts and instructions with a scaled handle pattern. I chose...

Read this entry »


View Texasgaloot's profile

A bow saw project #2: Step 2: Redo step number 1

08-31-2008 01:04 AM by Texasgaloot | 1 comment »

Sort of. Well, I went ahead and ordered the pin-handle-sawblade kit from Gramercy. I put the order in on Wednesday, the stuff was in my mailbox on Friday, and it came through via priority mail because I’m too cheap to have it overnighted. Now, I don’t care who you are, that’s fast. I didn’t need the overnight service. The pins are a nicely turned brass, and I epoxied them into the handles today. Until I have my lathe built, I’m going to call that one go...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com