LumberJocks

Woodworking blog entries tagged with 'glass'

  • Advertise with us
View kewald's profile

Inside Picture Framing #1: Glazing

12-03-2008 at 10:48 AM by kewald | 4 comments »

When framing anything using glass or acrylic as the glazing, there should be an air gap of at least 1/8” between the art or object being framed and the inside surface of the glass. This is to prevent moisture, from the condensation that will almost certainly occur, from transferring to the framed item. A common way to accomplish this is to use two layers of matting between the glass and the artwork. Other ways include special plastic spacers or to use a secondary rabbet in the frame ...

Read this entry »


View John Fry's profile

A glass top table with opposing arches

06-04-2008 at 06:46 PM by John Fry | 16 comments »

I call this the “Opposing Arches” table. This commissioned glass top display table, or buffet, is 50” wide at the base, 14” deep and 29” tall. It supports a piece of glass that is ¾” thick by 18” by 66”. The construction is shop sawn zebrawood veneers, laminated on two layers of 1/8” poplar bending ply, on a curved torsion box inner core. The curved members are then framed in sold quarter sawn sapelli. The divider box is shop sawn veneer, cut from a very fine grained piece of Macassar...

Read this entry »


View pappyjohn's profile

Corner Bookcase "Lazy Susan, Rotating Center", Challange 04

04-14-2008 at 03:23 PM by pappyjohn | 3 comments »

Hello All, Here’s my attempt at entering the Bookcase Challenge. My plans are for a Corner Bookcase Unit, with a Rotating Center Section. It will be constructed in two sections, Top and Bottom. These will be subdivided into three (3) sections, with the two (2) outer areas having Solid Oak framed Glass Doors with a golden color grill work attatched. The Top Middle Area will be the Rotating Lazy Susan Bookcase, it will be primarily of four (4) sections. Two larger areas for ...

Read this entry »


View lightweightladylefty's profile

Bookcase Challenge04 #1: Bookcase entry – Challenge04

04-05-2008 at 03:13 PM by lightweightladylefty | 8 comments »

I had already started working on the design for this bookcase when I became aware of this contest. Realizing that my built-in application (designed to conceal ductwork) was quite different from the needs of most people, I slightly redesigned the crown to make it a free-standing bookcase (although, for the sake of safety, I would still attach it to a wall if I were to place this one in my home). The close-up of the crown shows the area for built-in lighting which is simply a 36” fluore...

Read this entry »


« prev 1 2 3
24 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase