LumberJocks

Woodworking blog entries tagged with 'gauge'

  • Advertise with us
View David's profile

Furniture Design #1: Fibonacci gauge

08-05-2007 02:00 AM by David | 32 comments »

1 • 1 • 2 • 3 • 5 • 8 • 13 • 21 • 34 – The Fibonacci Sequence I have been fascinated with The Fibonacci Sequence and The Golden Rectangle for some time. I finally got around to building a Fibonacci Gauge that was featured in WOOD Magazine. The guage maintains a consatnt proportion of 1:1.618 between the points. It is used to help determine visually appealing proportional dimensions. I am looking forward to using the guage in future projects. Follow the text below for so...

Read this entry »


View Grumpy's profile

Fibonacci At Any Scale

08-06-2011 05:02 AM by Grumpy | 11 comments »

I thought it was about time I made myself a ‘Fibonacci Gauge’ and like most of us would I looked up on how everyone else did it. There were some great efforts made by fellow Jocks on the subject;David made a good crack at it http://lumberjocks.com/David/blog/1639so did FJPetruso http://lumberjocks.com/projects/37696and my good buddy Karson http://lumberjocks.com/projects/24528 Karson has his Excel spreadsheet for calculating gauges at any size. This is w...

Read this entry »


View PurpLev's profile

Beads Box #6: Incra Style Box Joint Jig/Sled for the Table Saw (998SE)

12-31-2010 02:15 AM by PurpLev | 5 comments »

While waiting for glue to dry I tackled the large drawer that will be faced with the mahogany/maple-stripe front. After the last project where I used dovetails for all the small drawer I wisened up (is that a word?!?) and went with box joint. My box joint jig is based on my Incra 998SE Miter gauge . The 1000SE comes with the flip stop which is very useful with 2 built in stops, and a micro adjustment which I use to sneak up to a perfect box joint fit. For added stability I also use the...

Read this entry »


View bubinga's profile

Height Gauge from Wood Magizne #1: Quick-and-easy height gauge

04-01-2011 03:35 AM by bubinga | 1 comment »

LINK TO WOOD MAG http://www.woodmagazine.com/woodworking-plans/tablesaw/quick-and-easy-height-gauge/?sssdmh=dm17.516531&esrc=nwwood033111&email=3150142140!

Read this entry »


View andyboy's profile

wedged marking gauge

01-16-2012 10:55 AM by andyboy | 13 comments »

Her are some processes I used to make a marking gauge that locks with a wedge. The timber is NZ Black Maire and Australian Blackwood.

Read this entry »


View JC Boysha's profile

For Fun projects #1: Golden Ratio Gauge.

11-01-2012 01:11 AM by JC Boysha | 1 comment »

So, I haven’t told you all this yet, but I’m a huge fan of Steve Ramsey at Woodworking for Mere Mortals. I was watching one of his videos and I noticed he made a Golden Ratio (or Phi) Gauge. This gauge is used to determine the proportions of an object so that it matches the Golden Ratio, which is considered a mathematical model for perfect beauty. I’m also a fan of Finite Mathematics. WARNING MATH CONTENT AHEAD! <math>Phi is a mathematical concept. It’s a cons...

Read this entry »


View A Slice of Wood Workshop's profile

Shop Made Tool: Simple Made Marking Gauge

08-19-2013 04:13 AM by A Slice of Wood Workshop | 0 comments »

Don’t waste your money buying a marking gauge. Make your own gauge and use up some of those scraps in the shop. Please subscribe to my channel and share my videos. Click here to view video (videos still aren’t embedding).

Read this entry »


View RGtools's profile

Hand tool tips and tricks #9: Alternate use for a wheel guage

03-09-2013 03:42 PM by RGtools | 6 comments »

I am very partial to wheel style gauges. Not only do they leave a crisp lines but you can use them as an extended and delicate routing plane for all sorts of fine operations. Hear I am using it to get a hinge installed. Try it out some time. Ryan

Read this entry »


View WayneC's profile

Shop Tools #4: JessEm Mite-R-Excel™ Precision Miter Gauge with Dual-Indexing Angle Location

06-02-2007 02:14 AM by WayneC | 16 comments »

David posted pictures of his new miter gauge and was looking for some pictures of other miter gauges. I commited to show some pictures of my Jessem miter guage. The first step in using my table saw is removing the Peacock. (Deb has named him LJ). The box on top of the table saw is a Biesmeyer Over Arm Saw guard that is waiting to be installed. On to the miter gauge. It is a JessEm Mite-R-Excel. It has a 24" fence and can extend to 36" The gauge has a Dual-Indexing Angle Location ...

Read this entry »


View A Slice of Wood Workshop's profile

Easy made snow gauge

11-06-2013 08:56 PM by A Slice of Wood Workshop | 0 comments »

This is a great project to get the kids involved. Also with the upcoming weather you can now keep track of how much snow you get. Total project cost $5. See the video here.

Read this entry »


1 2 next »
20 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase