LumberJocks

Woodworking blog entries tagged with 'gauge'

  • Advertise with us
View PurpLev's profile

Beads Box #6: Incra Style Box Joint Jig/Sled for the Table Saw (998SE)

1340 days ago by PurpLev | 5 comments »

While waiting for glue to dry I tackled the large drawer that will be faced with the mahogany/maple-stripe front. After the last project where I used dovetails for all the small drawer I wisened up (is that a word?!?) and went with box joint. My box joint jig is based on my Incra 998SE Miter gauge . The 1000SE comes with the flip stop which is very useful with 2 built in stops, and a micro adjustment which I use to sneak up to a perfect box joint fit. For added stability I also use the...

Read this entry »


View PurpLev's profile

Work(shop) in Progress #16: Incra 998SE Miter Gauge

2203 days ago by PurpLev | 11 comments »

So I am building a box frame using box-joints. I have my Incra 1000SE miter gauge setup with the stop block to cut the side pieces to length, and I’m all done with that. Time to cut the box joints. So I swap the blade on the table saw with my new (only used once before) Dado blade, I attach my homemade high fence for making box joints onto the Incra 1000 fence, and I’m ready to start cutting. If you’ve followed the details up to this point – you might have ...

Read this entry »


View Nils's profile

New toys from Woodworkers Expo in San Mateo

2483 days ago by Nils | 4 comments »

On Saturday I went to the Woodworkers Expo in San Mateo, California. I dragged along a friend who’s done some woodworking (he’s taking a class at the Palo Alto Adult Ed, which apparently has an awesome shop) but who didn’t want to buy anything. I made up for this by spending my entire budget. I had a list of things I “needed” – and I kept pretty close to the list, although my dollar didn’t stretch as far as I’d hoped it would. Anyway, here’...

Read this entry »


View Tim Dorcas's profile

A Clean Shop #1: A New Shop Cabinet

2484 days ago by Tim Dorcas | 0 comments »

The last two months or so, the shop has been a mess. Partly this is due to not having a place to put all of my lumber but the bigger part is I have had no place to put the larger equipment. Recently in one of the woodworking magazines they built a shop cabinet that housed the same type equipment I was trying to organize. They built it with spruce and peg board. I had some left over melamine (melamine that just happened to match all of the other cabinets in the shop) so I went to work with a d...

Read this entry »


View Dekker's profile

Reviews - Tools #2: Router Depth Gauge

2506 days ago by Dekker | 2 comments »

I got this tool last year as a freebie when I made an order from Rockler, and I just tossed it in my router table and promptly forgot about it. But now that I needed to do some precision router table work, I finally got a chance to use it, and so I’ll give a bit of a review. Though I’m sure there are other examples of the same concept, this one can be gotten from Rockler for $5.99. Though they illustrate the gauge being used directly on the router, it is also useful for ...

Read this entry »


View WayneC's profile

Shop Tools #8: Today's Finds - August 12 2007

2575 days ago by WayneC | 12 comments »

Yesterday was the monthly antique sale here in Sacramento and my daughter and I went shopping. It is a good family outting. I’ve gotten in the habit of sharing what I find on these outings, so here are photos of this months finds. I try to purchase things that I can use and avoid collecting for collecting’s sake. Sometimes I am successful and sometimes I am not. I have been looking for a jeweler’s frame saw for a while. They are useful for handcutting dove tails. I&...

Read this entry »


View David's profile

Furniture Design #1: Fibonacci gauge

2584 days ago by David | 32 comments »

1 • 1 • 2 • 3 • 5 • 8 • 13 • 21 • 34 – The Fibonacci Sequence I have been fascinated with The Fibonacci Sequence and The Golden Rectangle for some time. I finally got around to building a Fibonacci Gauge that was featured in WOOD Magazine. The guage maintains a consatnt proportion of 1:1.618 between the points. It is used to help determine visually appealing proportional dimensions. I am looking forward to using the guage in future projects. Follow the text below for so...

Read this entry »


View mot's profile

Tools #3: Incra Mitre Express / Incra 1000SE Mitre Gauge - VIDEO

2648 days ago by mot | 12 comments »

I wanted to add to the mitre gauge posts. Wayne posted a photo tour of the Jessem System, and David posted initial impressions of the Kreg System. The incra 1000SE is seen here in the Incra Miter Express sled. Both are available at Woodpeck.com You can see the kerf where the mitre sled straddles the blade in the tablesaw allowing for the cutoff piece to be coplanar with the workpiece. This decreases the chance of the saw flinging the cutoff piece back. The Incra guage is adjutab...

Read this entry »


View WayneC's profile

Shop Tools #4: JessEm Mite-R-Excel™ Precision Miter Gauge with Dual-Indexing Angle Location

2648 days ago by WayneC | 16 comments »

David posted pictures of his new miter gauge and was looking for some pictures of other miter gauges. I commited to show some pictures of my Jessem miter guage. The first step in using my table saw is removing the Peacock. (Deb has named him LJ). The box on top of the table saw is a Biesmeyer Over Arm Saw guard that is waiting to be installed. On to the miter gauge. It is a JessEm Mite-R-Excel. It has a 24" fence and can extend to 36" The gauge has a Dual-Indexing Angle Location ...

Read this entry »


View David's profile

Steamed Cherry Display Shelf

2668 days ago by David | 13 comments »

I thought I would share the progess of a couple of cherry display shelves being built for some close friends in Central Oregon. This will be used to display works of art in thier gallery. I am using steamed cherry and pocket screw construction. This a follow up from a previous post on using the Kreg Pocket Hole Jig system. I am taking a break from work and the shop spending Mothers Day weekend in Sisters, Oregon. Final sanding and finish await me at home. Cherry top with first coat of tung...

Read this entry »


« prev 1 2
20 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase