LumberJocks

Woodworking blog entries tagged with 'garter'

  • Advertise with us
View RaggedKerf's profile

My First Workbench #42: Leg Vise Chop Finished

312 days ago by RaggedKerf | 7 comments »

Finally wrapped this project up, after some setbacks. To correct the angled chop I had to see what was the problem: the hole drilled in the chop or the hole drilled for the coupler buried in the leg? First I tested the hole in the leg: Clearly, the threaded rod exiting the leg is off of perpendicular. Then, before I attacked the solution, I decided to check the chop: Huh. It’s off too! So, after some hand wringing, cussing, and a few beers, I took the case online ...

Read this entry »


View RaggedKerf's profile

My First Workbench #41: Leg Vise Chop: Seating the Garter

315 days ago by RaggedKerf | 8 comments »

Good news bad news kind of day. Twice. The first thing that hit me today was that the bare spot I had filed into the threads on the leg vise “screw” (really a 5/8” threaded rod from the Borg) for the first chop won’t work on v2 because the chop is twice as thick. Soooo…half an hour of filing and I had this: Then I started making the garter. First I measured out a 2.5” square of 1/2” oak. Then took it to the drill press and punched ...

Read this entry »


View Mauricio's profile

Workbench Build - Splayed leg French Bench #17: Leg Vise Part 2

551 days ago by Mauricio | 31 comments »

Welcome back folks. Progress has been slow but steady. I’m in the home stretch now. I need to finish up this leg vise, then the lower shelf and I’ll be ready for final assembly. A while back BrandonW gave me a Jatoba board. Its the same stuff I’m using on my deadman. Its beautiful dense wood and I’ve been milking every last scrap of it. I used the below scrap as my garter even though it is the checked end of the board. I ended up having to use a lot of superglue ...

Read this entry »


View RaggedKerf's profile

My First Workbench #31: Day 32: Mounting the Leg Vise (part 4)

638 days ago by RaggedKerf | 2 comments »

For the image heavy version of this post, please click here. At last, the day arrived when I could put it all together and complete the leg vise. Or so I thought. This post is actually a combination of a couple days work because I just couldn’t bring myself to post nothing but failure after failure until it was done. With some helpful tips from Sylvain over at the Lumberjocks site, I was able to (almost) complete the task of getting that garter (that I thought was an unmitigated...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase