LumberJocks

Woodworking blog entries tagged with 'garden gate'

  • Advertise with us
View newTim's profile

Copper Patina Gate II #2: Frame & Arch Layout

1849 days ago by newTim | 1 comment »

One of the main challenges of cutting an arch is figuring out the dimensions and glue angle of straight boards from which an arch can be cut. Fortunately, this time around I’m using Sketchup. As you can see in the picture it is pretty easy to figure these out, although I’m still searching for a formula to calculate the dimensions. The vertical angle is 15 degrees. I drew a line intersecting the bottom of the middle of the arch with the bottom of the right side. I then made a ...

Read this entry »


View newTim's profile

Copper Patina Garden Gate #9: Pre-Finish

1869 days ago by newTim | 0 comments »

Nothing real exciting at this point. Just wanted to have a complete blog on this project. I used the Turnlock System and Circle Jig by Milescraft to cut the arch in the panel. I noticed a nice review was posted by Teenagewoodworker on this jig and plan to my experience and thoughts when I get a chance. The bent laminations fit nicely and the whole thing easily went together, which is a pleasant change from my normal routine. I installed one side of the stays and left the othe...

Read this entry »


View newTim's profile

Copper Patina Garden Gate #8: Bent Laminated Stays

1872 days ago by newTim | 0 comments »

There are a number of ways to hold the panel in place. You could cut a rabbet on the inside edge, or you could cut a groove on the inside of the stiles and rails like a cabinet door panel. I chose to stick with the method David Marks used, panel stays. Yet once again, there is an arch to deal with. This time I thought I would just use the top rail as a bending template for a bent lamination to ensure a good fit. The plan was to resaw thin strips 2” wide and just long enough to fit ...

Read this entry »


View newTim's profile

Copper Patina Garden Gate #1: In for a penny, in for a ton

1883 days ago by newTim | 7 comments »

Ever since I saw David Marks’ Japanese Garden gate I was intrigued. I think it is the idea of working with wood, metal, chemicals, heat, and a creative process that caught my attention. It also helps to end up with something functional that is, hopefully, attractive to boot. So far my research has included re-reading David Marks DIY project page on this and his other patina projects, viewing Ron Young’s patina DVDs, looking at the Art Chemicals webpage, and searching the ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase