Woodworking blog entries tagged with 'frets'

  • Advertise with us
View Dan Lyke's profile

A Guitar for Daniel #6: Trying to not rush

12-20-2012 06:06 PM by Dan Lyke | 2 comments »

Daniel’s missing his friends and wants to head home, so while I’m trying to get him to slow down and take his time on the finishing, I’m aware that he wants to ditch us and head for the hills. The finish is still a bit soft, and if it were up to me we’d spend another week adding a layer, sanding it off, adding a layer, and so forth, but we’re not there. So last night we installed the frets, the nuts for the bridge hardware, and the tuning machines. Ho...

Read this entry »

View YorkshireStewart's profile

Acoustic Guitar #10: Mostly fretboard

10-29-2012 09:26 PM by YorkshireStewart | 12 comments »

Fine tuning the tail veneer & cutting dinky little mitres on the purflings. A nice piece of maple recycled from a shop fitting will do nicely for the fretboard. I Googled and then printed off a full size pattern for the frets. Attached it to the maple with d/s tape. and attached depth stops to a pull-saw of correct kerf width for frets I’m using… a rapidly knocked together ‘mitre’ box Result – happiness: I made a sanding block...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics