A French cleat is as ingenious as it is simple. It involves securing a strip of wood with a 45 degree bevel to the wall, and then securing an opposing beveled strip on the back of a cabinet or anything you want to hang. Its incredibly strong and versatile. Its a great way to hang cabinetry and as you’ll see in this video, it can be used to make an awesome modular wall storage unit.
Have a look at my french cleat system in my shop. It’s a very versatile system that can easily adapt to your storage needs. Check out my Youtube Channel for more videos, http://www.youtube.com/user/SailingandSuch?feature=guide Thanks for watching!
"Why is This Car Parked in My Shop?" Turning My One Car Garage Into A Shop #1: Moving the Hand Tools In...Installing A French Cleat System
So, I spent all summer building a barn, so I can move all the junk out of my garage, so I can buy a real cabinet saw, jointer, band saw, and drill press and have the room to leave them all reasonably set up so I don’t have to do the Harlem Shuffle every time I want to use a tool…(whew!) And wouldn’t you know it…the wife wants to park her car in the middle of my shop. More about that later…much later! So, I bought my Unisaw and built my out feed tableSo now I need...
When I first set up my shop, I bought a Delta 50-760 DC. It works well enough, but when jointing and planing a lot of wood the plastic bag fills up fairly rapidly and it is a PAIN to take off, empty and then re-install. Once you get the hang of it, the process is easier but it’s never easy and it almost inevitably ends up with a bunch of saw dust all over. So I decide to invest in a Oneida Super Dust Deputy. By the time I got it, I had realized that the fact that the Delta was mob...
Hello everyone. After another productive Saturday in the shop I came up with this French cleat saw blade storage option. It can be modified to your dimensions and needs as always. It features two rows of blade storage with 6 partitions each. The dividers can be removed for larger blades such as 1/2” or 3/4” bandsaw blades. You could even reduce the spacing on one of them for more table saw blades. For added storage options on the outside you could use dowels, screws, or nails. ...
I have redesigned this thing several times, waaay overdesigned it in SketchUp while briefly mad with visions of increasingly elaborate designs in even the most utilitarian of shop storage solutions, and tried to build it 3 times previously, giving up nearly immediately each time when things failed to work out. I’ve switched between construction grade ply and premium baltic birch ply. I’ve failed to account for kerf and cut things undersized, and failed to check ply for square befo...
After reading a lot of different options about how to store your planes (on there sole, on their side, blade in, blade out, etc) here is what I came up with: Here is the holder, basically two platforms on opposite ends of a cleat, edged with pieces of lattice As you can see I sized the platforms to be short of the blade opening. Both platforms are the same size so that I don’t need to place the plane the same direction every time.
Hammer hangerfor the French cleat Ok; some of you were after me, this for letting my first project in the new shop be a stick…The truth actually is that I was working on this also, but the stick was done first.This is so much more! This is 12 sticks!!!Dam you, I’m a bad ass, 12 sticks, glue and bamboo pins. So as many times before we start with a sketch.Btw, this blog is a mess… So if you want to make one, start guessing, you will need it.No measures, I just did as I w...
As I had posted previously I’m adding a french cleat storage on one wall of my garage to store all of my tools.I’m in the process of building tool holders First up is some hammer holdersA hole in a scrap of ply. I drilled about 90 – 95% of the hole in the board and then removed some of the material to fit the handle. A couples hammer up on the wall And a holder for my tape measures, A couple mending plates with a spacer to set them off of the cleat.
I got the inspiration for this from Workbench Magazine . I deliberately did not look at their drawings for dimensions or scale. This cart looked like a good design. As with many projects, it is infinitely easier to customize an existing design rather than come up with all original ideas. How many times do we stand on the shoulders of giants that have gone before us? The inner structure: I replaced the pegboard on theirs with 1/2” plywood thinking I would simply screw to...
- My Journey As A Scroll Saw Pattern Designer - 1264 parts
- Extremely Average - 324 parts
- Workshop Development - 95 parts
- A journey into the workshop. - 88 parts
- Daily Update - 87 parts
- Just for Fun... - 82 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 75 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1286 entries
- frank - 417 entries
- degoose - 388 entries
- dbhost - 370 entries
- Ecocandle - 325 entries
- MsDebbieP - 311 entries
- Karson - 301 entries
- Martin Sojka - 297 entries
- William - 257 entries
- Betsy - 221 entries
- mafe - 216 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 187 entries
- Rustic - 184 entries
- Chris Davis - 183 entries
- shipwright - 168 entries
- PurpLev - 163 entries
- BritBoxmaker - 161 entries
- stefang - 148 entries