The ground is finally drying out and I have started clearing the area for the shed. I need to keep two feet away from the property line, so I’m going to frame out a 10’ x 8’ area with pressure treated 4×4 with rebar stakes to keep everything in place. An inch or two of quarter down gravel levelled inside the frame and then a raised 8’x6’ platform of pressure treated 2×4s with pressure treated decking on top. I’ll put paving stones or something ...
A few years ago I became interested in wood working again. It was probably after I bought a Craftsman table saw from a neighbor for $25. I already had a band saw, a drill press and a sander. But my previous foray was interrupted by a divorce, marriage and 4 moves. It was also about that time that my wife and I decided to convert a bedroom into an office. When we looked at cabinets in the local big box store sticker shock set in. The price was outrageous for a few upper kitchen cabinets m...
As someone commented an entry or two ago: pics or it didn’t happen! Hardly complete, but two of the panels are up, and one has all it’s cleats on. Only had an hour or so in the shop and most of the time was spent clearing off this wall so I had a place to mount the panels! The panels are mounted to the walls with eight 2” #10 screws, and they cross four studs so they are not going anywhere. The vertical panel will only catch two studs unfortunately, but it should ...
Today was a bit of an experiment: Will my son sleep through me using my table saw in the garage? And the answer is: no. Not great news on the woodworking front, but not really surprising. Anyhow, I got about an hour to work in the shop today, and I set up my workmate as a semi-permanent mitre saw stand. My saw is just a cheapo Ryobi 10” SCMS but I swapped out my store brand 80 tooth blade for a CMT speciality SCMS 60 tooth blade today and man am I impressed. I was only cutting ...
We continue on with the build and get our dados sorted out.
This is a versatile little cabinet in which you can store whatever your heart desires in it. The overall dimensions for this project is 21”w x 11 ¼”d x 13 ¼” h. Of course if you need something bigger than make it bigger, or to fit your needs. I am using Baltic Birch for mine but use whatever material you feel like using. As always if you have any questions email them to me at firstname.lastname@example.org.—http://blip.tv/file/4726686
I have redesigned this thing several times, waaay overdesigned it in SketchUp while briefly mad with visions of increasingly elaborate designs in even the most utilitarian of shop storage solutions, and tried to build it 3 times previously, giving up nearly immediately each time when things failed to work out. I’ve switched between construction grade ply and premium baltic birch ply. I’ve failed to account for kerf and cut things undersized, and failed to check ply for square befo...
"Why is This Car Parked in My Shop?" Turning My One Car Garage Into A Shop #1: Moving the Hand Tools In...Installing A French Cleat System
So, I spent all summer building a barn, so I can move all the junk out of my garage, so I can buy a real cabinet saw, jointer, band saw, and drill press and have the room to leave them all reasonably set up so I don’t have to do the Harlem Shuffle every time I want to use a tool…(whew!) And wouldn’t you know it…the wife wants to park her car in the middle of my shop. More about that later…much later! So, I bought my Unisaw and built my out feed tableSo now I need...
After reading a lot of different options about how to store your planes (on there sole, on their side, blade in, blade out, etc) here is what I came up with: Here is the holder, basically two platforms on opposite ends of a cleat, edged with pieces of lattice As you can see I sized the platforms to be short of the blade opening. Both platforms are the same size so that I don’t need to place the plane the same direction every time.
As I had posted previously I’m adding a french cleat storage on one wall of my garage to store all of my tools.I’m in the process of building tool holders First up is some hammer holdersA hole in a scrap of ply. I drilled about 90 – 95% of the hole in the board and then removed some of the material to fit the handle. A couples hammer up on the wall And a holder for my tape measures, A couple mending plates with a spacer to set them off of the cleat.
- My Journey As A Scroll Saw Pattern Designer - 1185 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- As The Lathe Turns - 67 parts
- Workshop Development - 65 parts
- Sheila Landry (scrollgirl) - 1207 entries
- frank - 417 entries
- degoose - 387 entries
- dbhost - 331 entries
- Ecocandle - 325 entries
- MsDebbieP - 300 entries
- Martin Sojka - 297 entries
- Karson - 293 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- mafe - 201 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- BritBoxmaker - 159 entries
- shipwright - 159 entries
- scottb - 144 entries