I was invited to show at a fine woodworking exhibition at the Museum of the Rockies in Bozeman, Montana. The show is currently going on now and running 3 months until Jan 27th. There is a total of 25 woodworking artists showing and I am very honored to be counted among them. They are certainly a group of high-caliber artisans. There are also two other LumberJock members also showing at the exhibition – Andy Chidwick and Scott Morrison. It is pretty cool to think that 3 LumberJock ...
I’ve had some emails asking about the Fallingwater lamp; I’ve put a post on my blog about it with plans & photos: Fallingwater Lamp Randy
I’m finally finished with the desk. There were a few odds and ends that needed to be wrapped up. I decided to use figure 8 fasteners to hold the top to the base and allow it to move with the seasons. I happened to get my latest copy of Fine Woodworking and there was an article discussing how to properly connect the top and base and why it was important to allow for seasonal movement. A variety of methods were explained. I did learn that the figure 8’s along the front and back need to ...
Before I jumped into making the breadboard ends I decided to do some reading and get a little more explanation on wood movement and what role breadboard ends play. Excerpts from Popular WoodWorking magazine website: “Boards expand and contract at a greater rate across their width than they do along the length. How much they expand and contract is more a matter of species and final resting place than anything else. Also, wood tends to expand and contract more actively toward the bark ...
There are as many different approaches to drawers as there are woodworkers. The way I see it, a drawer is a box that slides into an opening. The use and type of drawer decide what is needed. In this case, the drawers don’t need to be fancy or complicated. The center drawer is 2” x 12- ½” x 24”, the side drawers 11– ½” wide. The drawer box is ¾” maple to give it a nice clean appearance. A cherry front will match the rest of the desk, and the drawer bottom is ¼” walnut plywood to add a vi...
Things finally are moving along, unfortunately, a little too fast in the case of the beveled through tenons on the bottom apron and the long stretchers. I forgot to cut the bevels on the tenons BEFORE I cut the arches. As a result I had to come up with plan B. As you can see from the picture, it entails a long fence on the miter bar and a longer piece of sacrificial wood clamped to the miter bar and the stretcher. Probably not the preferred method for cutting bevels on the tenons, b...
Time to talk tenons. I’ve made tenons using 3 different methods, a router with a straight bit, a stacked dado on the table saw, and a tenoning jig. Tenoning Jig:I discarded the tenoning jig some time back because it was a pain to set up and keep things square. I never could get the miter bar tight but not too tight and keep things running parallel to the blade which made for tenons that were tight on one end and loose on the other. Long tenons were also a problem since the saw blade wil...
Finally feels like the project is starting to move along. Alex from Glass Heritage just told me the glass for the inserts have been cut. He sent some pictures so I can approve the colors. Meanwhile, I’d better pick up the pace if I want the desk to be complete by the time the glass is ready. Making smooth arches seems to baffle a lot of folks. The problem is that most arches require a combination of a circle with a large radius and just the right amount of flattening the circle...
I’ve been doing everything but woodworking lately. Our oldest daughter started college, high school started, along with the girls swim season. It keeps raining and the grass keep growing necessitating mowing every 3 days or so. A thunderstorm last weekend resulted in a lightning strike on the house behind us (which started a fire) and caused an arc flash when the plug from our computer surge protector blew out of the wall outlet and cracked the outlet, tripped the surge protector, and ...
- My Journey As A Creative Designer - Woodworking and Beyond - 1823 parts
- Extremely Average - 324 parts
- Toy costruction - 131 parts
- A journey into the workshop. - 115 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Woodworking on a Half-Shoestring - 91 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 82 parts
- Shop stuff - 81 parts
- Sheila Landry (scrollgirl) - 1848 entries
- dbhost - 449 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- mafe - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- Dave Rutan - 273 entries
- William - 258 entries
- robscastle - 256 entries
- shipwright - 255 entries
- Betsy - 228 entries
- A Slice of Wood Workshop - 227 entries
- bandit571 - 224 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries