Swans and bones – Frame saw for copingParts and Swans Part four, the finale. Last blog ended with a soak of oil, this time we move on to finish, tension, making the saw work, and this will be the end of the Swans and bones blog. The frame is complete and it’s time for the tensioning.A piece of wood, same as the saw. Mark the size.At least as long as the saw top to the center. Also a little piece of wood for the half turn tension piece.(This I will explain later). ...
Swans and bones – Frame saw for copingParts and Swans Part three. Last blog ended with a good tobacco, the hardware, the turn handles and the side handles ready, now it is time to finish the frame. With the hardware and frame in place, the frame can be completed.So I place the piece of wood in the middle and am ready to mark up the width, and add length for the tenons.Since I want the frame sides to end parallel, the saw before tension will have to tilt a little towards the bla...
Swans and bones – Frame saw for copingParts and Swans Part two. Last blog ended where the swans and bones handles were finished, now I will move on to the home made hardware. Found this interesting link it might give some thoughts. A standard brass screw app two inch long.The head is cut off. The end rounded, this can be done by hand, but yes I am lazy… Ok, back to the hacksaw, cut down the middle. Then half way down on the side. Bravo!!!We have a blade hol...
Swans and bones – Frame saw for copingParts and Swans I was always fascinated by frame saws (bow saw in US), when I was a boy and visited my friends uncles cabinet making shop and they were hanging there on the wall I loved the look of them, they were like practical sculptures.And for about a year I had the dream to make a frame saw, but I kept finding other projects that came first, and felt my skills needed to grow before doing this.But when I fell over a picture of a frame saw wit...
A simple frame saw. part two. I dedicate this blog to or LJ buddy WayneC, you know why. This is a blog about making a simple frame saw step by step. Last blog ended where we had made the tenons for the frame, and we had actually also cut the top of the saw to length.In this blog we start fitting the blade.First position the blade and mark with a pencil where the blades top and bottom are.At the side with no handle the blade shall be just a hair over the saw end.At the side with handl...
A simple frame saw. Even if they call it a bow saw. Every one can make a frame saw!No I do not mean this to be big headed, I mean this from my heart, and I mean this as a motivation for all that have a wish to try – please just do it!I dedicate this blog to or LJ buddy WayneC, you know why. In this blog I will make a simple frame saw step by step. What is it with this bow saw / frame saw? Nothing really, just found out that the more I look, the less I understand what the right ...
- My Journey As A Creative Designer - Woodworking and Beyond - 1736 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 98 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 78 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1761 entries
- frank - 417 entries
- dbhost - 410 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 303 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 239 entries
- Betsy - 228 entries
- robscastle - 215 entries
- stefang - 214 entries
- Stevinmarin - 212 entries
- Dave Rutan - 209 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- Rustic - 190 entries