This is something I struggled with for a while and only recently have been able to do the math for. Purrmaster had asked how and most of this is my response to his question. If you want the inside of the frame to be 8 inches in length then, with a board of 2 inch in width, you would add the width times 2. so with a 2 inch wide board the out side of your frame will be 12 inches. However, if you want to account for the rabbet that you set the picture into then you have to do a bit more math...
When working on my various woodworking projects I found times that I had to glue odd joints and really didn’t have the clamps I needed. The solution to the problem was the development of a clamping block that simplified clamping these uncommon joints. The Universal Clamping Block tool will let you clamp the usual miters and and frames but will also facilitate the clamping of a great variety of other joints that occur in woodworking projects that present special clamping problems. ...
Another small step forward. I was able to mill some mahogany today for the face frames. I milled some 7/8”x1/2” strips from 1 long board that I was hoping would be enough for both front and back face frames but unfortunately it only yielded enough material for the front which is also all I had time today to manage. So I joint a board with my #6 so that I can then rip it on the TS to long narrow strips 7/8” wide (to cover the 3/4” plywood with excess that I could the...
The following are gateways to project/blog/forum postings re: the identified topic(more coming soon) LumberJocks’ Projects/Skills Gateways Bandsaw Boxes Benches Birdhouses Bookshelves Bowls Candle Holders Canes Clocks Coffee Tables Cradles Decks Doors Entertainment Centres Frames Guitars Hinges Jigs Kids' Projects Pen-Making Planes Sanding/Sand Paper Scrollsaws Toys All LumberJocks’ GATEWAYS Safety Tips ...
It was pouring outside, and so grey, but somehow the train kept on going. I somewhat planned for this in advance, and made sure I cut all the parts in advance so that I can continue working later on on the joinery in a more flexible manner, and flexible I mean literally as the kitchen counter flexed as I chiseled away. Then again, I was able to get some progress done while being with the family and not isolated in the garage. My daughter sat next to me watching me carve the sockets out with i...
One of my favorite projects ever to come out of my shop is the John Hall Frame reproduction (mine is on the left and the original is on the right). Just as a quick refresher, John Hall was one of the famous Hall Brothers who were responsible for the construction of many of the best known Greene & Greene creations. Now many of you may remember that I was attending a week-long class being taught by Darrell Peart at the William Ng School when I had an opportunity to handle, trace, and me...
- My Journey As A Scroll Saw Pattern Designer - 1613 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1638 entries
- frank - 417 entries
- degoose - 397 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 279 entries
- William - 258 entries
- shipwright - 222 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 187 entries
- Chris Davis - 183 entries
- robscastle - 181 entries