Some time ago I posted a blog about a dovetail joint I came up with. I call it the radial dovetail. It incorporates handcut dovetails, but rather than using the traditional 1:8 ratio for the dovetail angle for hardwood, each side of each tail varies and is drawn from a perspective point. Then the sides of the box were contoured to blend with the dovetail design. Here’s a picture of the nearly completed box. It is made of curly maple, Carribean rosewood, and hickory.I like to think of t...
The following are gateways to project/blog/forum postings re: the identified topic(more coming soon) LumberJocks’ Projects/Skills Gateways Bandsaw Boxes Benches Birdhouses Bookshelves Bowls Candle Holders Canes Clocks Coffee Tables Cradles Decks Doors Entertainment Centres Frames Guitars Hinges Jigs Kids' Projects Pen-Making Planes Sanding/Sand Paper Scrollsaws Toys All LumberJocks’ GATEWAYS Safety Tips ...
When I returned to woodworking several years ago my nephew had been talking about a particular style of “coffee” table he’d seen online somewhere and was describing it to me. Since he’d just announced plans to marry, I told him I’d make him, and his fiancée, the table as a wedding gift. He showed me some online photos of the table, which I used as the basic, general design plan. The joinery I chose is original but the style was taken from the photos. This piece is the result: ...
Here is my process for cutting the inlay shown on Glen Huey’s mirror frame. First I used a 2-1/8” forstner bit to cut a hole for the template. The template is made from 1/4” mdf core plywood, and a couple 2” wide strips of mdf on the underside. The underside of the jig is shown here. The mdf strips trap the 3-1/2” workpiece, and center the hole. My walnut stock was less than 3-1/2” wide, so I wedged it in place. Here is the jig and the route...
With the blade cut and drilled to length, and the frame shaped and finished (BLO) it was time to add some tension to the frame to pull on the blade. I was toying with some ideas, and ended up getting an IKEA steel wire hanger as the tension control. It’s quite simple, and uses 2 threaded ends one left hand one right hand, both pulling on the wire: Putting tension on the blade using this method is not as easy I was hoping it would be and requires a pin to roate and thread those...
Using my previously made SketchUp model I made a full sizes printed template using the following steps: 1. Setting up a Parallel view: The default view in SketchUp is “Perspective” which allows us to view things in 3D which looks ‘real’ due to the perspective view but for printing we want to be able to see the drawings in 2-D as if they were printed on a flat paper (which is what we about to do). In order to do this you need to go to the menus under “Camera...
I picked up today where I left yesterday. today however, I had a bit more time to work on this. I printed the face frame design/layout from Sketchup, and out to the freezer we go: I added the 2nd piece that makes up the back (had to use 2 pieces of plywood as I don’t have 1 large enough part for the back), and then I noticed that my plywood carcass is a bit out of wack- the back aligns with the left side, but the right side is a bit lower, ah crap, I guess I’ll have to shim...
Just in time for Memorial day… I made a display case for my father-in-law that holds an American flag and certificate. The flag and certificate were presented to him by an active Navy Seal serving in Operation Iraqi Freedom. The certificate shows the date the flag was flown over Camp Patton in Fallujah. This was quite an honor for my father-in-law, and the flag and certificate deserved a special case to preserve and protect them. Here’s a link to the video on how the ca...
I recently returned from seven awesome (and tiring) days of teaching at the William Ng School of Fine Woodworking. The first five days were dedicated to the Modern Hall Table, and the weekend class was focused on the frame. And believe it or not, the frame was the more challenging project to complete in the given time-frame. But I am glad to say that everyone was able to go home with some semblance of a finished project. I thought it would be fun to share some of the pictures I took durin...
This project is a few months old, but I’m just now getting around to writing this blog. I came up with a novel method of carving intricate shapes with a router, and I thought it was worth sharing. I’m probably not the first to come up with this technique, but I came up with it on my own without really seeing it anywhere else. The background: My wife wanted to make a large chalkboard to hang in our dining area, so I cut a large piece of cheap hardboard (30” square) and we ...
- My Journey As A Creative Designer - Woodworking and Beyond - 1793 parts
- Extremely Average - 324 parts
- Toy costruction - 116 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Woodworking on a Half-Shoestring - 82 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1818 entries
- dbhost - 436 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 313 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 242 entries
- Dave Rutan - 231 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- A Slice of Wood Workshop - 211 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 195 entries