LumberJocks

Woodworking blog entries tagged with 'forge'

  • Advertise with us
View A Slice of Wood Workshop's profile

Easiest Anvil Stand

03-15-2017 10:29 AM by A Slice of Wood Workshop | 0 comments »

I needed a stand for my anvil. I had just taken apart my workbench with all the 2×6 material and decided to use that. After cutting all the pieces to 23” I screwed 6 sets side by side using pocket holes. After I had all those done I screwed them all together in a laminate design. I flipped these back and forth to add strength so the pocket holes were not all on one side. Check out the video and subscribe.

Read this entry »


View A Slice of Wood Workshop's profile

Homemade tools

07-09-2012 02:10 PM by A Slice of Wood Workshop | 11 comments »

Yesterday I got a little adventurous, threw caution to the wind and instead of buying some tools, I made my own. I first made a cabinet scraper. I had to clean up the metal a little. After I got the metal almost all nice and shiny I had to make an edge on one side. I slapped a file in a vise and slid the scraper along it laying down. You have to make sure that the scraper to the file is 90° so the it creates burrs on both sides. This is how the scraper works. I got some little shavings while ...

Read this entry »


View Josh Goulart's profile

Refined Home Relics #3: Tinkering with cheese board designs

07-24-2011 11:51 PM by Josh Goulart | 3 comments »

see the whole story, with the music i wrote while building these projects! @ http://refinedhomerelics.blogspot.com

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com