LumberJocks

Woodworking blog entries tagged with 'foot powered lathe'

  • Advertise with us
View LastingBuild's profile

Treadle Lathe #2: Joinery Layout

09-27-2018 01:24 AM by LastingBuild | 2 comments »

Now that all the major components of the lathe are dimensioned I begin laying out the joinery. The treadle lathe will be build using mortise and tenon joinery secured with oak dowels. Check out the video for details! https://www.youtube.com/watch?v=aM81vCBo-1I

Read this entry »


View LastingBuild's profile

How to dimension lumber with handtools #5: The infamous crosscut

09-18-2018 01:30 PM by LastingBuild | 3 comments »

Crosscutting with a hand saw can be a real challenge and burden to the hand tool woodworker. In my video link below, I provide a tutorial on how to crosscut a large piece of stock with only hand tools. The result is within a 1/16 of perfection. The Paul sellers method combined with a few tricks of the trade will provide you the “know how” to cut large stock with a cheap saw. Thanks for watching! https://www.youtube.com/watch?v=TzMBxYcx7tQ

Read this entry »


View LastingBuild's profile

Treadle Lathe #1: Part I: Introduction

08-31-2018 11:56 AM by LastingBuild | 2 comments »

I am excited to build a treadle lathe. I recently began milling some rough sawn oak to use as the frame and I have assembled the needed hardware to make a functional lathe. I am using multiple sources in this project as reference material. I have listed the reference material below.: How to build a treadle Lathe by Steve Schmeck Lathe from a Loft by Roy Underhill Treadle Lathe by Mr. Chicadee on youtube. The hardware needed for this project is: 1/2” steel Rod...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com