The other night I ate a fortune cookie and thought, hmm this one is accurate…. How did that cookie know I would be writing about accomplishing my first furniture build? I had fun building this chair. And now I’m going to be focusing on making it easier to build the next ones. I would like some input on what everyone’s opinions on what wood they think is best for outdoor furniture like this, and what looks best. I’m going to try cedar for the next one. If you ...
I started this project for a friend a few months ago and will be putting the finishing touches on soon. It is a plywood box with pine face frame. I used my Kreg Jig for all the joints. This is the largest project I have tackled to date and has been a great learning experience. The plan has changed from the original drawings as we learned along the way. My wife might be a little upset that I have spent at least four times the cost of materials in new tools (and then some). I tell her it is an ...
Earlier this week, I decided to try cutting a dovetail joint for the first time. I had bought a Veritas dovetail saw earlier in the year and I had never taken it out of the box. As you can see from the pictures, it was certainly not a success as far as the joint is concerned. I pretty much just started cutting. I had watched a few videos and even seen Frank Klausz cut them up close when he visited Highland Hardware. The good thing is that I now have one under my belt and the next one will...
First off let me start by introducing myself. My name is John Gray, i’m currently 33 years old and live in Spencerport New York. I’ve been married to the love of my life for 7 years now and have 2 beautiful daughters (hence the title of my blog “3 girls and a woodworker”). I guess i’ve been into wood working for most of my life, i grew up with a dad that spent a lot of time in the workshop building things. He worked primarily with pine (becasue it was cheap) ...
I’ve been trying very hard to create a honey dipper, but since I don’t have an appropriate parting tool, it’s next to impossible. I have gotten very good at turning a square 2″x2″ bit of super cheap construction lumber into 10″ long dowels that are about 2″ diameter. I’m also very good at making saw dust. Today I completed my first finished lathe project, the first project that didn’t explode before I was done making it! I made a nostepinne, which is a bit less involved than a honey dipper...
Announcement! Summers Woodworking’s First Annual Creative 2×4 Contest Build 2013 is upholding a contest where you the woodworker will build something creative with a standard 2”x4”x8’ stud. Rules: You may enter only one project.By entering, you verify that your entry is your own creation (Note: Summers Woodworking is NOT responsible for monitoring authenticity). You must subscribe to my YouTube channel: http://www.youtube.com/subscription_center?add_user=SummersWood...
My wife saw a coffee table like this in a magazine, and asked if I could make one for her… the answer was of course “hell, yeah, your husband can build a fort for you”, but in the mean time, I was thinking, man, she knows the only thing I’ve done is an unintenationally skewed cabinet for the bathroom, that she doesn’t seem to notice, doesn’t care, or just doesn’t mention it. Anyway, I set out to buy the MDF sheet (up to today this is the only mater...
I bought a board of 3/4 beech. I chopped four pieces of it and glued it up. I’ve been wanting to make one of these for a while now. My dad is helping me with parts as I am still not allowed to use the tablesaw. This is going to take a while because of school and other priorities. Im going to bed the iron at 50 degrees. Its going to be my hybrid of a coffin smoother and a krenov style plane. I hope to get to actually shaping of it soon.
No matter how careful you think you are, when you feel the thunk of the blade as it catches on the bone means it’s too late. I reached to brush away a cutoff and got my thumb snagged in the blade. With my wife’s assistance I got it bandaged up, and then sat around all afternoon holding my hand up to relieve the pounding in my thumb. Three Ibuprofen and 30 minutes later I had relief. Now all I feel is stupid.
- My Journey As A Creative Designer - Woodworking and Beyond - 1792 parts
- Extremely Average - 324 parts
- Toy costruction - 115 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Woodworking on a Half-Shoestring - 82 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1817 entries
- dbhost - 436 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 313 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 241 entries
- Dave Rutan - 231 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- A Slice of Wood Workshop - 210 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 195 entries