A couple of years ago my wife met a lady who lived 10 miles from us and she said her husband owned a door and window plant, and that I should go at pay him a visit. I had never done it. Since i started to assist in making the toys for Christmas from the Mason – Dixon Woodworking Club, I thought that I’d check and see if they had any scraps that we could use for toy making. I went there today. They make wooden doors and windows for Million Dollar homes and they ship all ov...
The original Woodcutters Helper is precisely that, it measures the log you are sawing to your exact specifications. Its simple and effective. Firewood the same length stacks tighter and neater saving space. Never struggle with trying to fit a piece of wood that is too long into your stove ever again. Anyone who has collected firewood has used various techniques for determining where to saw the log or tree into wood that will fit their stove. Some people turn or swing their saw edge-wise us...
On September 2, a violent storm with 65 to 85 mph winds crossed central Wisconsin. It seems there was very little coverage of the storm. Even the communities less than an hour north or south of us were not aware of the severity of the storm which isn’t surprising considering the news coverage. Once our power was restored (32 hours later), this was all the news I could find about our county. (When our power was restored, more than half of those affected were still without power.)“Straight ...
Been Workin’ at Wood ....and so I have,and so I yet will be,and so I just can’t get enough,of that thing called workin’ wood! Well just some photos here of what’s going on around here at the moment, as I’m preparing for the best of winter. One of the opportunities that is presented to me up here, as I go through the seasons, is the ongoing adjustment to the need of change. And so I have been busy, and then more then a little busy at getting wood in and spli...
It seems I had nothing better to do tonight, because I ended up splitting a plane blank out of a piece of firewood and planing the four faces down. Partially it was to see if I could do it. Partially it was to try out a beater Stanley #5 I picked up a few weeks ago without having to go through the trouble of actually lapping, sharpening or otherwise tuning it properly. And partially I realized the turning blanks I picked up from the Rockler scrap bin are probably just a bit too small...
Surrounded by Wood Yep it’s coming, just as the squirrels are gathering their nuts, I’m busy bringing in this seasons winter firewood, to be ready for the long drawls of snow that will soon be gracing the land. So the other day found me out in the woods….hmmm, doesn’t about everyday find me out in the woods? Well so be it, there I was cutting up some leftovers on a part of section that had some blow-down and being around 4:00 or so, a rock wall grabbed my attenti...
So I finished turning the bud vase, actually I made two, and began to consider how to finish them.I knew the rotten wood is like a sponge.I’ve worked some punky wood, and just like end grain it’s always ready to suck the finish right out of the jar.In regular wood I usually put some 2 pound shellac on and the buff it off with the Beall system.I didn’t want to hit this with the polishing wheel as I was pretty sure it would disintegrate.I’ve been researching different ep...
Last year I got a pile of Ash logs from the city when they were taking down beetle infested trees in my neighborhood.I’ve been using bits of it here and there for small projects and barbecues.I’m doing a small table for my lady and have taken photos of my process for milling firewood sized chunks into thin slats for a rustic tabletop. Here be the log:I use the jointer to square two sides. All I need is two flat and square reference surfaces to register against the fence and ta...
In the My Projects section I posted the completion of a rustic headphones rack for my ancient audio-technica AT-703 headphones. Since that post I added another coat of Danish oil and a final finish of The Original Formula Johnson Paste Wax. Here is what it looks like without the headphones: ...and with the headphones: And here is a view of the main workstation area of the office, showing the rack in place: This was a rewarding build, true to my scratch-building nature ...
I come across some pretty amazing woodworking/woodprocessing tools online during my nightly research escapades – things I think the majority of the LJs crowd hasn’t seen (like me) – so I thought I’d make a little series to highlight some of the cooler, or rarer things I unearth. First up, one of the most convenient tools I’ve seen for processing entire trunks into firewood in a timely fashion. I have a bittersweet feeling when I see tools this efficient at h...
- My Journey As A Scroll Saw Pattern Designer - 1581 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1606 entries
- frank - 417 entries
- degoose - 396 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 278 entries
- William - 258 entries
- Betsy - 221 entries
- shipwright - 213 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 185 entries
- Chris Davis - 183 entries
- Smitty_Cabinetshop - 176 entries