LumberJocks

Woodworking blog entries tagged with 'finishing'

  • Advertise with us
View ShaunMeighan's profile

Making a Traditional Tool Cabinet Pt. 2

03-09-2017 02:42 PM by ShaunMeighan | 0 comments »

View on YouTube The 2nd part of my traditional tool cabinet project!

Read this entry »


View LegendInMyOwnMind's profile

Horizontal File Cabinet for drawings #2: Drawers installed and finishing done

10-03-2011 02:34 PM by LegendInMyOwnMind | 0 comments »

Finally finished this project. Turned out pretty good in spite of the table saw at work being way out of whack.

Read this entry »


View rando1's profile

Day 1 design and pulling together some pieces

07-28-2010 04:48 AM by rando1 | 0 comments »

We are working on a entry bench and mirror set for a homeowner. There is a small space in the entry of the condo by the base of the stairs that will accommodate a sitting bench and decorative mirror. The mirror unit will be made up of poplar and will have a dark finish. An existing mirror from the powder room has been fabricated and will be framed. a shelf and crown trim will be at the base and crown and a shelf will finish out the top. The bench seat will have a flip lid to store thi...

Read this entry »


View Nighthawk's profile

The Bar #2: - Nearing the end

12-08-2014 09:05 AM by Nighthawk | 0 comments »

View on YouTube Well the journey on this project is nearing the end…

Read this entry »


View Rogue's profile

Rogue Fine Living #1: Natural Lines- the work of Jeffro Uitto

01-19-2011 12:34 AM by Rogue | 0 comments »

If you’re a crab or a seagull on the Washington coast, there is one guy that has just become a part of the coastal scenery. His rugged figure just blends into the coastline. Blending in is helped by the fact that he’s usually lugging around a piece of drift wood that is commonplace on the inlet near Tokeland. His bent form under the weight of the wet wood perfectly mimics the shape of the gnarled piece he carries. (Read the rest of the artical at http://roguefineliving.com/)

Read this entry »


View Luke's profile

Chess pieces and board #3: Finishing Off Lathe

02-12-2014 04:59 PM by Luke | 0 comments »

I usually just finish the chess pieces one at a time. I wanted to be able to get a good smooth finish on them like you do on the lathe but still be able to turn another piece without having to wait for them to dry in between coats.This is what I came up with. I drilled a 1/4” hole into 3/4” dowel and inserted a 1/4” dowel to chuck in the drill. I drilled a 3/4” hole in the holder and used a round file to ream it out so there is enough play to let it spin freely. After ...

Read this entry »


View JimDaddyO's profile

Shop stuff #13: A simple and beautiful finish

11-13-2015 08:37 PM by JimDaddyO | 0 comments »

I have seen variations of this all over. I don’t think the ratios are overly critical. The results are wonderful. I think I may have found my “go to” finish. Replace the BLO with mineral oil for a food safe finish. https://youtu.be/WCkMt3sM2ks

Read this entry »


View ShaunMeighan's profile

NASA Inspired Toolbox!

07-14-2016 08:10 PM by ShaunMeighan | 0 comments »

Hey all, just wanted to share with you my NASA inspired toolbox! I’ve weathered it (separate post coming on that) and am really happy with how it turned out! View on YouTube

Read this entry »


View bandit571's profile

Shop storage projects #23: Chisel dresser: final details done

02-22-2017 05:44 PM by bandit571 | 0 comments »

Just about wrapped this project up. Had to set it up on the bench.. Had to measure for a kicker for the bottom drawer… Glue and a couple screws to hold it in place. Measured for a plywood back… Again, glue and screws. Started applying cleats to hold the top in place… Then added the top… No glue, just enough screws to hold things still, is all. Couple at each end. added this cleat ( on the wrong side, at that) to hold the shelf support in ...

Read this entry »


View Serradura's profile

#18 Challenge Tree Entries

03-16-2015 11:53 PM by Serradura | 0 comments »

Semi-interactive video. You can chose between my entry for the Challenge Tree and the one my twin-brother made. The Challenge Tree is an initiative of Dominic Bender at “Dominic Woodworks!”: http://www.dominicswoodworks.com/en/ After a few minutes you can click on “channel 1” for Gerrit’s “Woodworker’s meditation altar” or on “channel 2” for his twin-brother’s “Mallet for, and made on a pole lathe”.

Read this entry »


« prev 1 ... 115 116 117 118 119 120 121 122 next »
1216 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com